agora inbox for [email protected]help / color / mirror / Atom feed
[PATCH 1/5] Allow CREATE INDEX CONCURRENTLY on partitioned table 185+ messages / 2 participants [nested] [flat]
* [PATCH 1/5] Allow CREATE INDEX CONCURRENTLY on partitioned table @ 2020-06-06 22:42 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Justin Pryzby @ 2020-06-06 22:42 UTC (permalink / raw) Note, this effectively reverts 050098b14, so take care to not reintroduce the bug it fixed. --- doc/src/sgml/ref/create_index.sgml | 9 -- src/backend/commands/indexcmds.c | 143 ++++++++++++++++++------- src/test/regress/expected/indexing.out | 60 ++++++++++- src/test/regress/sql/indexing.sql | 18 +++- 4 files changed, 176 insertions(+), 54 deletions(-) diff --git a/doc/src/sgml/ref/create_index.sgml b/doc/src/sgml/ref/create_index.sgml index 965dcf472c..7c75119d78 100644 --- a/doc/src/sgml/ref/create_index.sgml +++ b/doc/src/sgml/ref/create_index.sgml @@ -686,15 +686,6 @@ Indexes: cannot. </para> - <para> - Concurrent builds for indexes on partitioned tables are currently not - supported. However, you may concurrently build the index on each - partition individually and then finally create the partitioned index - non-concurrently in order to reduce the time where writes to the - partitioned table will be locked out. In this case, building the - partitioned index is a metadata only operation. - </para> - </refsect2> </refsect1> diff --git a/src/backend/commands/indexcmds.c b/src/backend/commands/indexcmds.c index 8bc652ecd3..9ab1a66971 100644 --- a/src/backend/commands/indexcmds.c +++ b/src/backend/commands/indexcmds.c @@ -68,6 +68,7 @@ /* non-export function prototypes */ +static void reindex_invalid_child_indexes(Oid indexRelationId); static bool CompareOpclassOptions(Datum *opts1, Datum *opts2, int natts); static void CheckPredicate(Expr *predicate); static void ComputeIndexAttrs(IndexInfo *indexInfo, @@ -680,17 +681,6 @@ DefineIndex(Oid relationId, partitioned = rel->rd_rel->relkind == RELKIND_PARTITIONED_TABLE; if (partitioned) { - /* - * Note: we check 'stmt->concurrent' rather than 'concurrent', so that - * the error is thrown also for temporary tables. Seems better to be - * consistent, even though we could do it on temporary table because - * we're not actually doing it concurrently. - */ - if (stmt->concurrent) - ereport(ERROR, - (errcode(ERRCODE_FEATURE_NOT_SUPPORTED), - errmsg("cannot create index on partitioned table \"%s\" concurrently", - RelationGetRelationName(rel)))); if (stmt->excludeOpNames) ereport(ERROR, (errcode(ERRCODE_FEATURE_NOT_SUPPORTED), @@ -1128,6 +1118,11 @@ DefineIndex(Oid relationId, if (pd->nparts != 0) flags |= INDEX_CREATE_INVALID; } + else if (concurrent && OidIsValid(parentIndexId)) + { + /* If concurrent, initially build index partitions as "invalid" */ + flags |= INDEX_CREATE_INVALID; + } if (stmt->deferrable) constr_flags |= INDEX_CONSTR_CREATE_DEFERRABLE; @@ -1183,6 +1178,14 @@ DefineIndex(Oid relationId, partdesc = RelationGetPartitionDesc(rel); if ((!stmt->relation || stmt->relation->inh) && partdesc->nparts > 0) { + /* + * Need to close the relation before recursing into children, so + * copy needed data into a longlived context. + */ + + MemoryContext ind_context = AllocSetContextCreate(PortalContext, "CREATE INDEX", + ALLOCSET_DEFAULT_SIZES); + MemoryContext oldcontext = MemoryContextSwitchTo(ind_context); int nparts = partdesc->nparts; Oid *part_oids = palloc(sizeof(Oid) * nparts); bool invalidate_parent = false; @@ -1193,8 +1196,10 @@ DefineIndex(Oid relationId, nparts); memcpy(part_oids, partdesc->oids, sizeof(Oid) * nparts); + parentDesc = CreateTupleDescCopy(RelationGetDescr(rel)); + table_close(rel, NoLock); + MemoryContextSwitchTo(oldcontext); - parentDesc = RelationGetDescr(rel); opfamOids = palloc(sizeof(Oid) * numberOfKeyAttributes); for (i = 0; i < numberOfKeyAttributes; i++) opfamOids[i] = get_opclass_family(classObjectId[i]); @@ -1237,10 +1242,12 @@ DefineIndex(Oid relationId, continue; } + oldcontext = MemoryContextSwitchTo(ind_context); childidxs = RelationGetIndexList(childrel); attmap = build_attrmap_by_name(RelationGetDescr(childrel), parentDesc); + MemoryContextSwitchTo(oldcontext); foreach(cell, childidxs) { @@ -1311,10 +1318,14 @@ DefineIndex(Oid relationId, */ if (!found) { - IndexStmt *childStmt = copyObject(stmt); + IndexStmt *childStmt; bool found_whole_row; ListCell *lc; + oldcontext = MemoryContextSwitchTo(ind_context); + childStmt = copyObject(stmt); + MemoryContextSwitchTo(oldcontext); + /* * We can't use the same index name for the child index, * so clear idxname to let the recursive invocation choose @@ -1366,10 +1377,18 @@ DefineIndex(Oid relationId, createdConstraintId, is_alter_table, check_rights, check_not_in_use, skip_build, quiet); + if (concurrent) + { + PopActiveSnapshot(); + PushActiveSnapshot(GetTransactionSnapshot()); + invalidate_parent = true; + } } - pgstat_progress_update_param(PROGRESS_CREATEIDX_PARTITIONS_DONE, - i + 1); + /* For concurrent build, this is a catalog-only stage */ + if (!concurrent) + pgstat_progress_update_param(PROGRESS_CREATEIDX_PARTITIONS_DONE, + i + 1); free_attrmap(attmap); } @@ -1379,41 +1398,33 @@ DefineIndex(Oid relationId, * invalid, this is incorrect, so update our row to invalid too. */ if (invalidate_parent) - { - Relation pg_index = table_open(IndexRelationId, RowExclusiveLock); - HeapTuple tup, - newtup; - - tup = SearchSysCache1(INDEXRELID, - ObjectIdGetDatum(indexRelationId)); - if (!HeapTupleIsValid(tup)) - elog(ERROR, "cache lookup failed for index %u", - indexRelationId); - newtup = heap_copytuple(tup); - ((Form_pg_index) GETSTRUCT(newtup))->indisvalid = false; - CatalogTupleUpdate(pg_index, &tup->t_self, newtup); - ReleaseSysCache(tup); - table_close(pg_index, RowExclusiveLock); - heap_freetuple(newtup); - } - } + index_set_state_flags(indexRelationId, INDEX_DROP_CLEAR_VALID); + } else + table_close(rel, NoLock); /* * Indexes on partitioned tables are not themselves built, so we're * done here. */ - table_close(rel, NoLock); if (!OidIsValid(parentIndexId)) + { + if (concurrent) + reindex_invalid_child_indexes(indexRelationId); + pgstat_progress_end_command(); + } + return address; } - if (!concurrent) + if (!concurrent || OidIsValid(parentIndexId)) { - /* Close the heap and we're done, in the non-concurrent case */ - table_close(rel, NoLock); + /* + * We're done if this is the top-level index, + * or the catalog-only phase of a partition built concurrently + */ - /* If this is the top-level index, we're done. */ + table_close(rel, NoLock); if (!OidIsValid(parentIndexId)) pgstat_progress_end_command(); @@ -1626,6 +1637,62 @@ DefineIndex(Oid relationId, return address; } +/* Reindex invalid child indexes created earlier */ +static void +reindex_invalid_child_indexes(Oid indexRelationId) +{ + ListCell *lc; + int npart = 0; + ReindexParams params = { + .options = REINDEXOPT_CONCURRENTLY + }; + + MemoryContext ind_context = AllocSetContextCreate(PortalContext, "CREATE INDEX", + ALLOCSET_DEFAULT_SIZES); + MemoryContext oldcontext; + List *childs = find_inheritance_children(indexRelationId, ShareLock); + List *partitions = NIL; + + PreventInTransactionBlock(true, "REINDEX INDEX"); + + foreach (lc, childs) + { + Oid partoid = lfirst_oid(lc); + + /* XXX: need to retrofit progress reporting into it */ + // pgstat_progress_update_param(PROGRESS_CREATEIDX_PARTITIONS_DONE, + // npart++); + + if (get_index_isvalid(partoid) || + !RELKIND_HAS_STORAGE(get_rel_relkind(partoid))) + continue; + + /* Save partition OID */ + oldcontext = MemoryContextSwitchTo(ind_context); + partitions = lappend_oid(partitions, partoid); + MemoryContextSwitchTo(oldcontext); + } + + /* + * Process each partition listed in a separate transaction. Note that + * this commits and then starts a new transaction immediately. + * XXX: since this is done in 2*N transactions, it could just as well + * call ReindexRelationConcurrently directly + */ + ReindexMultipleInternal(partitions, ¶ms); + + /* + * CIC needs to mark a partitioned index as VALID, which itself + * requires setting READY, which is unset for CIC (even though + * it's meaningless for an index without storage). + * This must be done only while holding a lock which precludes adding + * partitions. + * See also: validatePartitionedIndex(). + */ + index_set_state_flags(indexRelationId, INDEX_CREATE_SET_READY); + CommandCounterIncrement(); + index_set_state_flags(indexRelationId, INDEX_CREATE_SET_VALID); +} /* * CheckMutability diff --git a/src/test/regress/expected/indexing.out b/src/test/regress/expected/indexing.out index c93f4470c9..f04abc6897 100644 --- a/src/test/regress/expected/indexing.out +++ b/src/test/regress/expected/indexing.out @@ -50,11 +50,63 @@ select relname, relkind, relhassubclass, inhparent::regclass (8 rows) drop table idxpart; --- Some unsupported features +-- CIC on partitioned table create table idxpart (a int, b int, c text) partition by range (a); -create table idxpart1 partition of idxpart for values from (0) to (10); -create index concurrently on idxpart (a); -ERROR: cannot create index on partitioned table "idxpart" concurrently +create table idxpart1 partition of idxpart for values from (0) to (10) partition by range(a); +create table idxpart11 partition of idxpart1 for values from (0) to (10) partition by range(a); +create table idxpart111 partition of idxpart11 default partition by range(a); +create table idxpart1111 partition of idxpart111 default partition by range(a); +create table idxpart2 partition of idxpart for values from (10) to (20); +insert into idxpart2 values(10),(10); -- not unique +create index concurrently on idxpart (a); -- partitioned +create index concurrently on idxpart1 (a); -- partitioned and partition +create index concurrently on idxpart11 (a); -- partitioned and partition, with no leaves +create index concurrently on idxpart2 (a); -- leaf +create unique index concurrently on idxpart (a); -- partitioned, unique failure +ERROR: could not create unique index "idxpart2_a_idx2_ccnew" +DETAIL: Key (a)=(10) is duplicated. +\d idxpart + Partitioned table "public.idxpart" + Column | Type | Collation | Nullable | Default +--------+---------+-----------+----------+--------- + a | integer | | | + b | integer | | | + c | text | | | +Partition key: RANGE (a) +Indexes: + "idxpart_a_idx" btree (a) + "idxpart_a_idx1" UNIQUE, btree (a) INVALID +Number of partitions: 2 (Use \d+ to list them.) + +\d idxpart1 + Partitioned table "public.idxpart1" + Column | Type | Collation | Nullable | Default +--------+---------+-----------+----------+--------- + a | integer | | | + b | integer | | | + c | text | | | +Partition of: idxpart FOR VALUES FROM (0) TO (10) +Partition key: RANGE (a) +Indexes: + "idxpart1_a_idx" btree (a) INVALID + "idxpart1_a_idx1" btree (a) + "idxpart1_a_idx2" UNIQUE, btree (a) INVALID +Number of partitions: 1 (Use \d+ to list them.) + +\d idxpart2 + Table "public.idxpart2" + Column | Type | Collation | Nullable | Default +--------+---------+-----------+----------+--------- + a | integer | | | + b | integer | | | + c | text | | | +Partition of: idxpart FOR VALUES FROM (10) TO (20) +Indexes: + "idxpart2_a_idx" btree (a) + "idxpart2_a_idx1" btree (a) + "idxpart2_a_idx2" UNIQUE, btree (a) INVALID + "idxpart2_a_idx2_ccnew" UNIQUE, btree (a) INVALID + drop table idxpart; -- Verify bugfix with query on indexed partitioned table with no partitions -- https://postgr.es/m/[email protected] diff --git a/src/test/regress/sql/indexing.sql b/src/test/regress/sql/indexing.sql index 42f398b67c..3d4b6e9bc9 100644 --- a/src/test/regress/sql/indexing.sql +++ b/src/test/regress/sql/indexing.sql @@ -29,10 +29,22 @@ select relname, relkind, relhassubclass, inhparent::regclass where relname like 'idxpart%' order by relname; drop table idxpart; --- Some unsupported features +-- CIC on partitioned table create table idxpart (a int, b int, c text) partition by range (a); -create table idxpart1 partition of idxpart for values from (0) to (10); -create index concurrently on idxpart (a); +create table idxpart1 partition of idxpart for values from (0) to (10) partition by range(a); +create table idxpart11 partition of idxpart1 for values from (0) to (10) partition by range(a); +create table idxpart111 partition of idxpart11 default partition by range(a); +create table idxpart1111 partition of idxpart111 default partition by range(a); +create table idxpart2 partition of idxpart for values from (10) to (20); +insert into idxpart2 values(10),(10); -- not unique +create index concurrently on idxpart (a); -- partitioned +create index concurrently on idxpart1 (a); -- partitioned and partition +create index concurrently on idxpart11 (a); -- partitioned and partition, with no leaves +create index concurrently on idxpart2 (a); -- leaf +create unique index concurrently on idxpart (a); -- partitioned, unique failure +\d idxpart +\d idxpart1 +\d idxpart2 drop table idxpart; -- Verify bugfix with query on indexed partitioned table with no partitions -- 2.17.0 --dTy3Mrz/UPE2dbVg Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0002-f-progress-reporting.patch" ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 185+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 185+ messages in thread
end of thread, other threads:[~2026-07-01 10:31 UTC | newest] Thread overview: 185+ messages (download: mbox mbox.gz follow: Atom feed) -- links below jump to the message on this page -- 2020-06-06 22:42 [PATCH 1/5] Allow CREATE INDEX CONCURRENTLY on partitioned table Justin Pryzby <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]>
This inbox is served by agora; see mirroring instructions for how to clone and mirror all data and code used for this inbox