agora inbox for pgsql-hackers@postgresql.orghelp / color / mirror / Atom feed
[PATCH v19 3/6] Refactor index_concurrently_create_copy() for use with REPACK (CONCURRENTLY). 324+ messages / 2 participants [nested] [flat]
* [PATCH v19 3/6] Refactor index_concurrently_create_copy() for use with REPACK (CONCURRENTLY). @ 2025-08-11 13:31 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 324+ messages in thread From: Antonin Houska @ 2025-08-11 13:31 UTC (permalink / raw) This patch moves the code to index_create_copy() and adds a "concurrently" parameter so it can be used by REPACK (CONCURRENTLY). With the CONCURRENTLY option, REPACK cannot simply swap the heap file and rebuild its indexes. Instead, it needs to build a separate set of indexes (including system catalog entries) *before* the actual swap, to reduce the time AccessExclusiveLock needs to be held for. --- src/backend/catalog/index.c | 36 ++++++++++++++++++++++++++++-------- src/include/catalog/index.h | 3 +++ 2 files changed, 31 insertions(+), 8 deletions(-) diff --git a/src/backend/catalog/index.c b/src/backend/catalog/index.c index 3063abff9a5..0dee1b1a9d8 100644 --- a/src/backend/catalog/index.c +++ b/src/backend/catalog/index.c @@ -1290,15 +1290,31 @@ index_create(Relation heapRelation, /* * index_concurrently_create_copy * - * Create concurrently an index based on the definition of the one provided by - * caller. The index is inserted into catalogs and needs to be built later - * on. This is called during concurrent reindex processing. - * - * "tablespaceOid" is the tablespace to use for this index. + * Variant of index_create_copy(), called during concurrent reindex + * processing. */ Oid index_concurrently_create_copy(Relation heapRelation, Oid oldIndexId, Oid tablespaceOid, const char *newName) +{ + return index_create_copy(heapRelation, oldIndexId, tablespaceOid, newName, + true); +} + +/* + * index_create_copy + * + * Create an index based on the definition of the one provided by caller. The + * index is inserted into catalogs and needs to be built later on. + * + * "tablespaceOid" is the tablespace to use for this index. + * + * The actual implementation of index_concurrently_create_copy(), reusable for + * other purposes. + */ +Oid +index_create_copy(Relation heapRelation, Oid oldIndexId, Oid tablespaceOid, + const char *newName, bool concurrently) { Relation indexRelation; IndexInfo *oldInfo, @@ -1317,6 +1333,7 @@ index_concurrently_create_copy(Relation heapRelation, Oid oldIndexId, List *indexColNames = NIL; List *indexExprs = NIL; List *indexPreds = NIL; + int flags = 0; indexRelation = index_open(oldIndexId, RowExclusiveLock); @@ -1325,9 +1342,9 @@ index_concurrently_create_copy(Relation heapRelation, Oid oldIndexId, /* * Concurrent build of an index with exclusion constraints is not - * supported. + * supported. If !concurrently, ii_ExclusinOps is currently not needed. */ - if (oldInfo->ii_ExclusionOps != NULL) + if (oldInfo->ii_ExclusionOps != NULL && concurrently) ereport(ERROR, (errcode(ERRCODE_FEATURE_NOT_SUPPORTED), errmsg("concurrent index creation for exclusion constraints is not supported"))); @@ -1435,6 +1452,9 @@ index_concurrently_create_copy(Relation heapRelation, Oid oldIndexId, stattargets[i].isnull = isnull; } + if (concurrently) + flags = INDEX_CREATE_SKIP_BUILD | INDEX_CREATE_CONCURRENT; + /* * Now create the new index. * @@ -1458,7 +1478,7 @@ index_concurrently_create_copy(Relation heapRelation, Oid oldIndexId, indcoloptions->values, stattargets, reloptionsDatum, - INDEX_CREATE_SKIP_BUILD | INDEX_CREATE_CONCURRENT, + flags, 0, true, /* allow table to be a system catalog? */ false, /* is_internal? */ diff --git a/src/include/catalog/index.h b/src/include/catalog/index.h index 4daa8bef5ee..063a891351a 100644 --- a/src/include/catalog/index.h +++ b/src/include/catalog/index.h @@ -99,6 +99,9 @@ extern Oid index_concurrently_create_copy(Relation heapRelation, Oid oldIndexId, Oid tablespaceOid, const char *newName); +extern Oid index_create_copy(Relation heapRelation, Oid oldIndexId, + Oid tablespaceOid, const char *newName, + bool concurrently); extern void index_concurrently_build(Oid heapRelationId, Oid indexRelationId); -- 2.39.5 --ipmcfwv2cm3fpxaf Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v19-0004-Move-conversion-of-a-historic-to-MVCC-snapshot-t.patch" ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
end of thread, other threads:[~2026-07-01 10:31 UTC | newest] Thread overview: 324+ messages (download: mbox mbox.gz follow: Atom feed) -- links below jump to the message on this page -- 2025-08-11 13:31 [PATCH v19 3/6] Refactor index_concurrently_create_copy() for use with REPACK (CONCURRENTLY). Antonin Houska <ah@cybertec.at> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com>
This inbox is served by agora; see mirroring instructions for how to clone and mirror all data and code used for this inbox