agora inbox for [email protected]
help / color / mirror / Atom feed[PATCH v51 07/10] Check for transaction block early in ExecRepack
191+ messages / 2 participants
[nested] [flat]
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
* [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics
@ 2026-07-09 20:21 Nathan Bossart <[email protected]>
0 siblings, 0 replies; 191+ messages in thread
From: Nathan Bossart @ 2026-07-09 20:21 UTC (permalink / raw)
---
src/backend/access/heap/heapam_handler.c | 2 +-
src/backend/access/table/tableam.c | 59 +++++++++++-------------
src/include/access/relscan.h | 8 ++--
3 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index bf87430cf01..0f24a132564 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -1965,7 +1965,7 @@ heapam_scan_get_blocks_done(HeapScanDesc hscan)
if (hscan->rs_base.rs_parallel != NULL)
{
bpscan = (ParallelBlockTableScanDesc) hscan->rs_base.rs_parallel;
- startblock = bpscan->phs_startblock;
+ startblock = pg_atomic_read_u32(&bpscan->phs_startblock);
}
else
startblock = hscan->rs_startblock;
diff --git a/src/backend/access/table/tableam.c b/src/backend/access/table/tableam.c
index 68ff0966f1c..f2038ea9205 100644
--- a/src/backend/access/table/tableam.c
+++ b/src/backend/access/table/tableam.c
@@ -421,9 +421,8 @@ table_block_parallelscan_initialize(Relation rel, ParallelTableScanDesc pscan)
bpscan->base.phs_syncscan = synchronize_seqscans &&
!RelationUsesLocalBuffers(rel) &&
bpscan->phs_nblocks > NBuffers / 4;
- SpinLockInit(&bpscan->phs_mutex);
- bpscan->phs_startblock = InvalidBlockNumber;
- bpscan->phs_numblock = InvalidBlockNumber;
+ pg_atomic_init_u32(&bpscan->phs_startblock, InvalidBlockNumber);
+ pg_atomic_init_u32(&bpscan->phs_numblock, InvalidBlockNumber);
pg_atomic_init_u64(&bpscan->phs_nallocated, 0);
return sizeof(ParallelBlockTableScanDescData);
@@ -459,25 +458,22 @@ table_block_parallelscan_startblock_init(Relation rel,
StaticAssertDecl(MaxBlockNumber <= 0xFFFFFFFE,
"pg_nextpower2_32 may be too small for non-standard BlockNumber width");
- BlockNumber sync_startpage = InvalidBlockNumber;
BlockNumber scan_nblocks;
/* Reset the state we use for controlling allocation size. */
memset(pbscanwork, 0, sizeof(*pbscanwork));
-retry:
- /* Grab the spinlock. */
- SpinLockAcquire(&pbscan->phs_mutex);
-
/*
* When the caller specified a limit on the number of blocks to scan, set
* that in the ParallelBlockTableScanDesc, if it's not been done by
* another worker already.
*/
- if (numblocks != InvalidBlockNumber &&
- pbscan->phs_numblock == InvalidBlockNumber)
+ if (numblocks != InvalidBlockNumber)
{
- pbscan->phs_numblock = numblocks;
+ uint32 expected = InvalidBlockNumber;
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_numblock, &expected,
+ numblocks);
}
/*
@@ -485,36 +481,35 @@ retry:
* so now. If a startblock was specified, start there, otherwise if this
* is not a synchronized scan, we just start at block 0, but if it is a
* synchronized scan, we must get the starting position from the
- * synchronized scan machinery. We can't hold the spinlock while doing
- * that, though, so release the spinlock, get the information we need, and
- * retry. If nobody else has initialized the scan in the meantime, we'll
- * fill in the value we fetched on the second time through.
+ * synchronized scan machinery.
+ *
+ * If another worker initializes phs_startblock concurrently, just use
+ * their value.
*/
- if (pbscan->phs_startblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_startblock) == InvalidBlockNumber)
{
+ BlockNumber newstartblock;
+ uint32 expected = InvalidBlockNumber;
+
if (startblock != InvalidBlockNumber)
- pbscan->phs_startblock = startblock;
+ newstartblock = startblock;
else if (!pbscan->base.phs_syncscan)
- pbscan->phs_startblock = 0;
- else if (sync_startpage != InvalidBlockNumber)
- pbscan->phs_startblock = sync_startpage;
+ newstartblock = 0;
else
- {
- SpinLockRelease(&pbscan->phs_mutex);
- sync_startpage = ss_get_location(rel, pbscan->phs_nblocks);
- goto retry;
- }
+ newstartblock = ss_get_location(rel, pbscan->phs_nblocks);
+
+ pg_atomic_compare_exchange_u32(&pbscan->phs_startblock, &expected,
+ newstartblock);
}
- SpinLockRelease(&pbscan->phs_mutex);
/*
* Figure out how many blocks we're going to scan; either all of them, or
* just phs_numblock's worth, if a limit has been imposed.
*/
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* We determine the chunk size based on scan_nblocks. First we split
@@ -595,10 +590,10 @@ table_block_parallelscan_nextpage(Relation rel,
*/
/* First, figure out how many blocks we're planning on scanning */
- if (pbscan->phs_numblock == InvalidBlockNumber)
+ if (pg_atomic_read_u32(&pbscan->phs_numblock) == InvalidBlockNumber)
scan_nblocks = pbscan->phs_nblocks;
else
- scan_nblocks = pbscan->phs_numblock;
+ scan_nblocks = pg_atomic_read_u32(&pbscan->phs_numblock);
/*
* Now check if we have any remaining blocks in a previous chunk for this
@@ -644,7 +639,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (nallocated >= scan_nblocks)
page = InvalidBlockNumber; /* all blocks have been allocated */
else
- page = (nallocated + pbscan->phs_startblock) % pbscan->phs_nblocks;
+ page = (nallocated + pg_atomic_read_u32(&pbscan->phs_startblock)) % pbscan->phs_nblocks;
/*
* Report scan location. Normally, we report the current page number.
@@ -658,7 +653,7 @@ table_block_parallelscan_nextpage(Relation rel,
if (page != InvalidBlockNumber)
ss_report_location(rel, page);
else if (nallocated == pbscan->phs_nblocks)
- ss_report_location(rel, pbscan->phs_startblock);
+ ss_report_location(rel, pg_atomic_read_u32(&pbscan->phs_startblock));
}
return page;
diff --git a/src/include/access/relscan.h b/src/include/access/relscan.h
index 2ea06a67a63..2305d0159f3 100644
--- a/src/include/access/relscan.h
+++ b/src/include/access/relscan.h
@@ -19,7 +19,6 @@
#include "nodes/tidbitmap.h"
#include "port/atomics.h"
#include "storage/relfilelocator.h"
-#include "storage/spin.h"
#include "utils/relcache.h"
@@ -99,10 +98,9 @@ typedef struct ParallelBlockTableScanDescData
ParallelTableScanDescData base;
BlockNumber phs_nblocks; /* # blocks in relation at start of scan */
- slock_t phs_mutex; /* mutual exclusion for setting startblock */
- BlockNumber phs_startblock; /* starting block number */
- BlockNumber phs_numblock; /* # blocks to scan, or InvalidBlockNumber if
- * no limit */
+ pg_atomic_uint32 phs_startblock; /* starting block number */
+ pg_atomic_uint32 phs_numblock; /* # blocks to scan, or InvalidBlockNumber
+ * if no limit */
pg_atomic_uint64 phs_nallocated; /* number of blocks allocated to
* workers so far. */
} ParallelBlockTableScanDescData;
--
2.50.1 (Apple Git-155)
--Ot5x3ffkWEuxilWO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
filename=v1-0008-convert-FastPathStrongRelationLocks-to-atomics.patch
^ permalink raw reply [nested|flat] 191+ messages in thread
end of thread, other threads:[~2026-07-09 20:21 UTC | newest]
Thread overview: 191+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
2026-07-09 20:21 [PATCH v1 7/8] convert ParallelBlockTableScanDescData->phs_{start,num}block to atomics Nathan Bossart <[email protected]>
This inbox is served by agora; see mirroring instructions
for how to clone and mirror all data and code used for this inbox