agora inbox for pgsql-hackers@postgresql.org  

help / color / mirror / Atom feed

[PATCH v44b 4/4] hack deadlock detector
252+ messages / 3 participants
[nested] [flat]

* [PATCH v44b 4/4] hack deadlock detector
@ 2026-03-25 19:35 Álvaro Herrera <alvherre@kurilemu.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Álvaro Herrera @ 2026-03-25 19:35 UTC (permalink / raw)

---
 src/backend/commands/cluster.c                | 10 +++
 src/backend/storage/lmgr/deadlock.c           | 12 +++
 src/include/storage/proc.h                    |  1 +
 src/test/modules/injection_points/Makefile    |  1 +
 .../expected/repack_deadlock.out              | 63 ++++++++++++++
 src/test/modules/injection_points/meson.build |  1 +
 .../specs/repack_deadlock.spec                | 83 +++++++++++++++++++
 7 files changed, 171 insertions(+)
 create mode 100644 src/test/modules/injection_points/expected/repack_deadlock.out
 create mode 100644 src/test/modules/injection_points/specs/repack_deadlock.spec

diff --git a/src/backend/commands/cluster.c b/src/backend/commands/cluster.c
index 2c3058ba10d..d5b1dfbff69 100644
--- a/src/backend/commands/cluster.c
+++ b/src/backend/commands/cluster.c
@@ -372,6 +372,16 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
 	/* Determine the lock mode to use. */
 	lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
 
+	/*
+	 * If in concurrent mode, set the PROC_IN_CONCURRENT_REPACK flag.  This
+	 * makes the deadlock checker cause anyone that would conflict with us
+	 * to error out.  It's important to set this flag ahead of actually locking
+	 * the relation; it won't of course affect anyone until we do have a lock
+	 * that others can conflict with.
+	 */
+	if ((params.options & CLUOPT_CONCURRENT) != 0)
+		MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
+
 	/*
 	 * If a single relation is specified, process it and we're done ... unless
 	 * the relation is a partitioned table, in which case we fall through.
diff --git a/src/backend/storage/lmgr/deadlock.c b/src/backend/storage/lmgr/deadlock.c
index b8962d875b6..10266e384aa 100644
--- a/src/backend/storage/lmgr/deadlock.c
+++ b/src/backend/storage/lmgr/deadlock.c
@@ -620,6 +620,18 @@ FindLockCycleRecurseMember(PGPROC *checkProc,
 						proc->statusFlags & PROC_IS_AUTOVACUUM)
 						blocking_autovacuum_proc = proc;
 
+					/*
+					 * If we note that we're blocked by some process running
+					 * REPACK (CONCURRENTLY), just fail.  That process is
+					 * going to upgrade its lock at some point, and it would
+					 * be inappropriate for any other process to cause that
+					 * to fail.
+					 */
+					if (checkProc == MyProc &&
+						proc->statusFlags & PROC_IN_CONCURRENT_REPACK)
+						/* not a serious error message proposal */
+						elog(ERROR, "oops, we're blocked by REPACK, time to die");
+
 					/* We're done looking at this proclock */
 					break;
 				}
diff --git a/src/include/storage/proc.h b/src/include/storage/proc.h
index 1dad125706e..4e340ead455 100644
--- a/src/include/storage/proc.h
+++ b/src/include/storage/proc.h
@@ -69,6 +69,7 @@ struct XidCache
 #define		PROC_AFFECTS_ALL_HORIZONS	0x20	/* this proc's xmin must be
 												 * included in vacuum horizons
 												 * in all databases */
+#define		PROC_IN_CONCURRENT_REPACK	0x40	/* REPACK (CONCURRENTLY) */
 
 /* flags reset at EOXact */
 #define		PROC_VACUUM_STATE_MASK \
diff --git a/src/test/modules/injection_points/Makefile b/src/test/modules/injection_points/Makefile
index 2cd7d87c533..f7663859fe2 100644
--- a/src/test/modules/injection_points/Makefile
+++ b/src/test/modules/injection_points/Makefile
@@ -15,6 +15,7 @@ REGRESS_OPTS = --dlpath=$(top_builddir)/src/test/regress
 ISOLATION = basic \
 	    inplace \
 	    repack \
+	    repack_deadlock \
 	    repack_toast \
 	    syscache-update-pruned \
 	    heap_lock_update
diff --git a/src/test/modules/injection_points/expected/repack_deadlock.out b/src/test/modules/injection_points/expected/repack_deadlock.out
new file mode 100644
index 00000000000..42505d10933
--- /dev/null
+++ b/src/test/modules/injection_points/expected/repack_deadlock.out
@@ -0,0 +1,63 @@
+Parsed test spec with 2 sessions
+
+starting permutation: wait_before_lock add_column wakeup_before_lock check1
+injection_points_attach
+-----------------------
+                       
+(1 row)
+
+step wait_before_lock: 
+	REPACK (CONCURRENTLY) repack_deadlock USING INDEX repack_deadlock_pkey;
+ <waiting ...>
+step add_column: 
+	alter table repack_deadlock add column noise text;
+ <waiting ...>
+step add_column: <... completed>
+ERROR:  oops, we're blocked by REPACK, time to die
+step wakeup_before_lock: 
+	SELECT injection_points_wakeup('repack-concurrently-before-lock');
+
+injection_points_wakeup
+-----------------------
+                       
+(1 row)
+
+step wait_before_lock: <... completed>
+step check1: 
+	INSERT INTO relfilenodes(node)
+	SELECT relfilenode FROM pg_class WHERE relname='repack_deadlock';
+
+	SELECT count(DISTINCT node) FROM relfilenodes;
+
+	SELECT i, j FROM repack_deadlock ORDER BY i, j;
+
+	INSERT INTO data_s1(i, j)
+	SELECT i, j FROM repack_deadlock;
+
+	SELECT count(*)
+	FROM data_s1 d1 FULL JOIN data_s2 d2 USING (i, j)
+	WHERE d1.i ISNULL OR d2.i ISNULL;
+
+count
+-----
+    1
+(1 row)
+
+i|j
+-+-
+1|1
+2|2
+3|3
+4|4
+(4 rows)
+
+count
+-----
+    4
+(1 row)
+
+injection_points_detach
+-----------------------
+                       
+(1 row)
+
diff --git a/src/test/modules/injection_points/meson.build b/src/test/modules/injection_points/meson.build
index a414abb924b..1cd88d6db65 100644
--- a/src/test/modules/injection_points/meson.build
+++ b/src/test/modules/injection_points/meson.build
@@ -46,6 +46,7 @@ tests += {
       'basic',
       'inplace',
       'repack',
+      'repack_deadlock',
       'repack_toast',
       'syscache-update-pruned',
       'heap_lock_update',
diff --git a/src/test/modules/injection_points/specs/repack_deadlock.spec b/src/test/modules/injection_points/specs/repack_deadlock.spec
new file mode 100644
index 00000000000..9d23a6588c2
--- /dev/null
+++ b/src/test/modules/injection_points/specs/repack_deadlock.spec
@@ -0,0 +1,83 @@
+# Test REPACK with a concurrent transaction that would cause a deadlock
+setup
+{
+	CREATE EXTENSION injection_points;
+
+	CREATE TABLE repack_deadlock(i int PRIMARY KEY, j int);
+	INSERT INTO repack_deadlock(i, j) VALUES (1, 1), (2, 2), (3, 3), (4, 4);
+
+	CREATE TABLE relfilenodes(node oid);
+
+	CREATE TABLE data_s1(i int, j int);
+	CREATE TABLE data_s2(i int, j int);
+}
+
+teardown
+{
+	DROP TABLE repack_deadlock;
+	DROP EXTENSION injection_points;
+
+	DROP TABLE relfilenodes;
+	DROP TABLE data_s1;
+	DROP TABLE data_s2;
+}
+
+session s1
+setup
+{
+	SELECT injection_points_set_local();
+	SELECT injection_points_attach('repack-concurrently-before-lock', 'wait');
+}
+# Perform the initial load and wait for s2 to do some data changes.
+step wait_before_lock
+{
+	REPACK (CONCURRENTLY) repack_deadlock USING INDEX repack_deadlock_pkey;
+}
+# Check the table from the perspective of s1.
+#
+# Besides the contents, we also check that relfilenode has changed.
+
+# Have each session write the contents into a table and use FULL JOIN to check
+# if the outputs are identical.
+step check1
+{
+	INSERT INTO relfilenodes(node)
+	SELECT relfilenode FROM pg_class WHERE relname='repack_deadlock';
+
+	SELECT count(DISTINCT node) FROM relfilenodes;
+
+	SELECT i, j FROM repack_deadlock ORDER BY i, j;
+
+	INSERT INTO data_s1(i, j)
+	SELECT i, j FROM repack_deadlock;
+
+	SELECT count(*)
+	FROM data_s1 d1 FULL JOIN data_s2 d2 USING (i, j)
+	WHERE d1.i ISNULL OR d2.i ISNULL;
+}
+teardown
+{
+	SELECT injection_points_detach('repack-concurrently-before-lock');
+}
+
+session s2
+# Change the existing data. UPDATE changes both key and non-key columns. Also
+# update one row twice to test whether tuple version generated by this session
+# can be found.
+step add_column
+{
+	alter table repack_deadlock add column noise text;
+}
+
+step wakeup_before_lock
+{
+	SELECT injection_points_wakeup('repack-concurrently-before-lock');
+}
+
+# Test if data changes introduced while one session is performing REPACK
+# CONCURRENTLY find their way into the table.
+permutation
+	wait_before_lock
+	add_column
+	wakeup_before_lock
+	check1
-- 
2.47.3


--fot5plqmb33ey33c--





^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* ci: Generate crashlogs on Windows
@ 2026-06-10 12:59 Nazir Bilal Yavuz <byavuz81@gmail.com>
  2026-06-10 13:49 ` Re: ci: Generate crashlogs on Windows Andres Freund <andres@anarazel.de>
  0 siblings, 1 reply; 252+ messages in thread

From: Nazir Bilal Yavuz @ 2026-06-10 12:59 UTC (permalink / raw)
  To: pgsql-hackers; +Cc: Andres Freund <andres@anarazel.de>

Hi,

cdb.exe was available on GHA Windows images but it wasn't configured
to generate crashlogs. Attached patch configures cdb.exe to generate
crashlogs to "<github.workspace>\crashlogs\" in
"crashlog-<pid-in-hex>.txt" format. Current upload logs step already
collects these logs so no change is needed there.

Most of the logic is copied from where (previous) Postgres CI Windows
images were generated [1]. When I use the '!adplusext.adpprocname'
debugger flag, the CI job hangs. It needs 'adplusext.dll' to run but
it isn't available on GHA Windows images.

Example GHA run which crashlogs are generated and collected:
https://github.com/nbyavuz/postgres/actions/runs/27275147059

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

-- 
Regards,
Nazir Bilal Yavuz
Microsoft


Attachments:

  [text/x-patch] v1-0001-ci-Generate-crashlogs-on-Windows.patch (6.7K, ../../CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow@mail.gmail.com/2-v1-0001-ci-Generate-crashlogs-on-Windows.patch)
  download | inline diff:
From a60a5821352f59ba2ba31330610811eb61e9efe5 Mon Sep 17 00:00:00 2001
From: Nazir Bilal Yavuz <byavuz81@gmail.com>
Date: Tue, 9 Jun 2026 16:15:30 +0300
Subject: [PATCH v1] ci: Generate crashlogs on Windows

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this step is too long, it is implemented as composite action.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion:
---
 .../actions/windows-setup-debugger/action.yml | 82 +++++++++++++++++++
 .github/workflows/pg-ci.yml                   | 12 +--
 2 files changed, 88 insertions(+), 6 deletions(-)
 create mode 100644 .github/actions/windows-setup-debugger/action.yml

diff --git a/.github/actions/windows-setup-debugger/action.yml b/.github/actions/windows-setup-debugger/action.yml
new file mode 100644
index 00000000000..e6e5192db39
--- /dev/null
+++ b/.github/actions/windows-setup-debugger/action.yml
@@ -0,0 +1,82 @@
+name: Setup Windows debugger
+description: >-
+  Setup Windows debugger to log all crashes to
+  <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+runs:
+  using: composite
+  steps:
+    - name: Setup Windows debugger
+      shell: pwsh
+      run: |
+        $crashdir = "${{ github.workspace }}/crashlogs"
+        New-Item -ItemType Directory -Force -Path $crashdir
+
+        # Ensure restricted child processes can write the log file
+        icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+        # Prevent windows error handling dialog from causing hangs
+        New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+          -Name 'DontShowUI' -Value 1 -PropertyType DWord
+        New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+          -Name 'Disabled' -Value 1 -PropertyType DWord
+
+        ### Fallback minidumps if the JIT debugger below doesn't run
+        New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+          -Name 'LocalDumps'
+        New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+          -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+        New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+          -Name 'DumpCount' -Value 5 -PropertyType DWord
+        New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+          -Name 'DumpType'  -Value 1 -PropertyType DWord
+        ###
+
+        $cdb64 = @(
+            'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+            'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+          ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+        $cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+        ###
+        # -p PID:
+        #   Specifies the decimal process ID to be debugged. This is used to
+        #   debug a process that is already running.
+        # -e Event:
+        #   Signals the debugger that the specified event has occurred. This
+        #   option is only used when starting the debugger programmatically.
+        # -g:
+        #   Ignores the initial breakpoint in target application. This option
+        #   will cause the target application to continue running after it is
+        #   started or CDB attaches to it, unless another breakpoint has been
+        #   set.
+        # -kqm:
+        #   Starts CDB/NTSD in quiet mode.
+        # -c "command":
+        #   Specifies the initial debugger command to run at start-up. This
+        #   command must be surrounded with quotation marks. Multiple commands
+        #   can be separated with semicolons.
+        ###
+        $debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+        Write-Host "Using cdb (x64): $cdb64"
+        Set-ItemProperty `
+          -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+          -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+        New-ItemProperty -Force -PropertyType DWord -Value 1 `
+          -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+          -Name 'Auto'
+
+        Write-Host "Using cdb (x86): $cdb86"
+        Set-ItemProperty `
+          -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+          -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+        New-ItemProperty -Force -PropertyType DWord -Value 1 `
+          -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+          -Name 'Auto'
+
+        # Show registered AeDebug values for diagnostics
+        Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+          Format-List Debugger,Auto
+        Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+          Format-List Debugger,Auto
diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..7331b261166 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,9 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - name: Setup Windows debugger
+        uses: ./.github/actions/windows-setup-debugger
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1022,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1116,9 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - name: Setup Windows debugger
+        uses: ./.github/actions/windows-setup-debugger
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1141,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
-- 
2.47.3



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* Re: ci: Generate crashlogs on Windows
  2026-06-10 12:59 ci: Generate crashlogs on Windows Nazir Bilal Yavuz <byavuz81@gmail.com>
@ 2026-06-10 13:49 ` Andres Freund <andres@anarazel.de>
  2026-06-10 15:54   ` Re: ci: Generate crashlogs on Windows Nazir Bilal Yavuz <byavuz81@gmail.com>
  0 siblings, 1 reply; 252+ messages in thread

From: Andres Freund @ 2026-06-10 13:49 UTC (permalink / raw)
  To: Nazir Bilal Yavuz <byavuz81@gmail.com>; +Cc: pgsql-hackers

Hi,

On 2026-06-10 15:59:20 +0300, Nazir Bilal Yavuz wrote:
> cdb.exe was available on GHA Windows images but it wasn't configured
> to generate crashlogs. Attached patch configures cdb.exe to generate
> crashlogs to "<github.workspace>\crashlogs\" in
> "crashlog-<pid-in-hex>.txt" format. Current upload logs step already
> collects these logs so no change is needed there.
> 
> Most of the logic is copied from where (previous) Postgres CI Windows
> images were generated [1]. When I use the '!adplusext.adpprocname'
> debugger flag, the CI job hangs. It needs 'adplusext.dll' to run but
> it isn't available on GHA Windows images.
> 
> Example GHA run which crashlogs are generated and collected:
> https://github.com/nbyavuz/postgres/actions/runs/27275147059

Thanks for working on this!

> +++ b/.github/actions/windows-setup-debugger/action.yml
> @@ -0,0 +1,82 @@
> +name: Setup Windows debugger
> +description: >-
> +  Setup Windows debugger to log all crashes to
> +  <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
> +
> +runs:
> +  using: composite
> +  steps:
> +    - name: Setup Windows debugger
> +      shell: pwsh
> +      run: |
> +        $crashdir = "${{ github.workspace }}/crashlogs"
> +        New-Item -ItemType Directory -Force -Path $crashdir

Any reason to not just put this into src/tools/ci/<something>.ps1? Given that
we're just talking about a single step, I don't really see the benefit of a
composite action here.

Greetings,

Andres Freund





^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* Re: ci: Generate crashlogs on Windows
  2026-06-10 12:59 ci: Generate crashlogs on Windows Nazir Bilal Yavuz <byavuz81@gmail.com>
  2026-06-10 13:49 ` Re: ci: Generate crashlogs on Windows Andres Freund <andres@anarazel.de>
@ 2026-06-10 15:54   ` Nazir Bilal Yavuz <byavuz81@gmail.com>
  0 siblings, 0 replies; 252+ messages in thread

From: Nazir Bilal Yavuz @ 2026-06-10 15:54 UTC (permalink / raw)
  To: Andres Freund <andres@anarazel.de>; +Cc: pgsql-hackers

Hi,

Thank you for looking into this!

On Wed, 10 Jun 2026 at 16:49, Andres Freund <andres@anarazel.de> wrote:
>
> On 2026-06-10 15:59:20 +0300, Nazir Bilal Yavuz wrote:
> > +++ b/.github/actions/windows-setup-debugger/action.yml
> > @@ -0,0 +1,82 @@
> > +name: Setup Windows debugger
> > +description: >-
> > +  Setup Windows debugger to log all crashes to
> > +  <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
> > +
> > +runs:
> > +  using: composite
> > +  steps:
> > +    - name: Setup Windows debugger
> > +      shell: pwsh
> > +      run: |
> > +        $crashdir = "${{ github.workspace }}/crashlogs"
> > +        New-Item -ItemType Directory -Force -Path $crashdir
>
> Any reason to not just put this into src/tools/ci/<something>.ps1? Given that
> we're just talking about a single step, I don't really see the benefit of a
> composite action here.

Not any particular reason. I started implementing that in a pg-ci.yml,
then moved it to composite action when I realized it was too long. I
think having a script is better, so attached v2 uses that way.

-- 
Regards,
Nazir Bilal Yavuz
Microsoft


Attachments:

  [text/x-patch] v2-0001-ci-Generate-crashlogs-on-Windows.patch (6.2K, ../../CAN55FZ3X-PEwnzy_iW1yT9YoAb2u7bfKyoKsKV9_yrUg7rXd=g@mail.gmail.com/2-v2-0001-ci-Generate-crashlogs-on-Windows.patch)
  download | inline diff:
From 5655e2550c1c040955f6b33f28fd3736decffd0f Mon Sep 17 00:00:00 2001
From: Nazir Bilal Yavuz <byavuz81@gmail.com>
Date: Tue, 9 Jun 2026 16:15:30 +0300
Subject: [PATCH v2] ci: Generate crashlogs on Windows

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this step is too long, it is implemented as
'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.47.3



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <andres@anarazel.de>
  0 siblings, 0 replies; 252+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 252+ messages in thread