agora inbox for [email protected]help / color / mirror / Atom feed
[PATCH v20 2/3] Lock referenced objects before permission checks in DDL commands 135+ messages / 2 participants [nested] [flat]
* [PATCH v20 2/3] Lock referenced objects before permission checks in DDL commands @ 2026-04-27 14:19 Bertrand Drouvot <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Bertrand Drouvot @ 2026-04-27 14:19 UTC (permalink / raw) Add LockNotPinnedObjectById() calls before object_aclcheck() at all caller sites where a permission check on a referenced object occurs before the dependency on that object is recorded. This converts permission check before lock to lock before permission check. It closes the TOCTOU window that could allow a REVOKE to succeed between the permission check and the dependency recording. Author: Bertrand Drouvot <[email protected]> Reviewed-by: Discussion: https://postgr.es/m/[email protected] --- src/backend/catalog/dependency.c | 22 ++++++++++++++++++++++ src/backend/catalog/namespace.c | 1 + src/backend/catalog/pg_aggregate.c | 5 +++++ src/backend/catalog/pg_cast.c | 1 + src/backend/catalog/pg_operator.c | 2 ++ src/backend/commands/aggregatecmds.c | 2 ++ src/backend/commands/alter.c | 3 +++ src/backend/commands/collationcmds.c | 2 ++ src/backend/commands/conversioncmds.c | 3 +++ src/backend/commands/extension.c | 1 + src/backend/commands/foreigncmds.c | 5 +++++ src/backend/commands/functioncmds.c | 11 +++++++++++ src/backend/commands/indexcmds.c | 2 ++ src/backend/commands/opclasscmds.c | 2 ++ src/backend/commands/operatorcmds.c | 8 ++++++++ src/backend/commands/statscmds.c | 1 + src/backend/commands/subscriptioncmds.c | 4 ++++ src/backend/commands/tablecmds.c | 7 +++++++ src/backend/commands/trigger.c | 2 ++ src/backend/commands/tsearchcmds.c | 2 ++ src/backend/commands/typecmds.c | 8 ++++++++ src/include/catalog/dependency.h | 1 + 22 files changed, 95 insertions(+) 22.8% src/backend/catalog/ 75.8% src/backend/commands/ diff --git a/src/backend/catalog/dependency.c b/src/backend/catalog/dependency.c index 7e26691393d..a41e6ee2175 100644 --- a/src/backend/catalog/dependency.c +++ b/src/backend/catalog/dependency.c @@ -1678,6 +1678,24 @@ LockNotPinnedObject(const ObjectAddress *object) } } +/* + * LockNotPinnedObjectById + * + * Lock the object if it is not pinned. This is a convenience wrapper + * for callers that need to lock a referenced object before a permission + * check, converting permission check before lock to lock before permission + * check. + */ +void +LockNotPinnedObjectById(Oid classid, Oid objid) +{ + ObjectAddress object; + + ObjectAddressSet(object, classid, objid); + + LockNotPinnedObject(&object); +} + /* * recordDependencyOnExpr - find expression dependencies * @@ -1960,8 +1978,11 @@ find_expr_references_walker(Node *node, objoid = DatumGetObjectId(con->constvalue); if (SearchSysCacheExists1(PROCOID, ObjectIdGetDatum(objoid))) + { + LockNotPinnedObjectById(ProcedureRelationId, objoid); add_object_address(ProcedureRelationId, objoid, 0, context->addrs); + } break; case REGOPEROID: case REGOPERATOROID: @@ -2057,6 +2078,7 @@ find_expr_references_walker(Node *node, { FuncExpr *funcexpr = (FuncExpr *) node; + LockNotPinnedObjectById(ProcedureRelationId, funcexpr->funcid); add_object_address(ProcedureRelationId, funcexpr->funcid, 0, context->addrs); /* fall through to examine arguments */ diff --git a/src/backend/catalog/namespace.c b/src/backend/catalog/namespace.c index 56b87d878e8..7dec076e111 100644 --- a/src/backend/catalog/namespace.c +++ b/src/backend/catalog/namespace.c @@ -3512,6 +3512,7 @@ LookupCreationNamespace(const char *nspname) namespaceId = get_namespace_oid(nspname, false); + LockNotPinnedObjectById(NamespaceRelationId, namespaceId); aclresult = object_aclcheck(NamespaceRelationId, namespaceId, GetUserId(), ACL_CREATE); if (aclresult != ACLCHECK_OK) aclcheck_error(aclresult, OBJECT_SCHEMA, diff --git a/src/backend/catalog/pg_aggregate.c b/src/backend/catalog/pg_aggregate.c index 243b952b9cc..41b390e8d96 100644 --- a/src/backend/catalog/pg_aggregate.c +++ b/src/backend/catalog/pg_aggregate.c @@ -586,22 +586,26 @@ AggregateCreate(const char *aggName, */ for (i = 0; i < numArgs; i++) { + LockNotPinnedObjectById(TypeRelationId, aggArgTypes[i]); aclresult = object_aclcheck(TypeRelationId, aggArgTypes[i], GetUserId(), ACL_USAGE); if (aclresult != ACLCHECK_OK) aclcheck_error_type(aclresult, aggArgTypes[i]); } + LockNotPinnedObjectById(TypeRelationId, aggTransType); aclresult = object_aclcheck(TypeRelationId, aggTransType, GetUserId(), ACL_USAGE); if (aclresult != ACLCHECK_OK) aclcheck_error_type(aclresult, aggTransType); if (OidIsValid(aggmTransType)) { + LockNotPinnedObjectById(TypeRelationId, aggmTransType); aclresult = object_aclcheck(TypeRelationId, aggmTransType, GetUserId(), ACL_USAGE); if (aclresult != ACLCHECK_OK) aclcheck_error_type(aclresult, aggmTransType); } + LockNotPinnedObjectById(TypeRelationId, finaltype); aclresult = object_aclcheck(TypeRelationId, finaltype, GetUserId(), ACL_USAGE); if (aclresult != ACLCHECK_OK) aclcheck_error_type(aclresult, finaltype); @@ -909,6 +913,7 @@ lookup_agg_function(List *fnName, } /* Check aggregate creator has permission to call the function */ + LockNotPinnedObjectById(ProcedureRelationId, fnOid); aclresult = object_aclcheck(ProcedureRelationId, fnOid, GetUserId(), ACL_EXECUTE); if (aclresult != ACLCHECK_OK) aclcheck_error(aclresult, OBJECT_FUNCTION, get_func_name(fnOid)); diff --git a/src/backend/catalog/pg_cast.c b/src/backend/catalog/pg_cast.c index 5119c2acda2..bb48e686f83 100644 --- a/src/backend/catalog/pg_cast.c +++ b/src/backend/catalog/pg_cast.c @@ -105,6 +105,7 @@ CastCreate(Oid sourcetypeid, Oid targettypeid, /* dependency on function */ if (OidIsValid(funcid)) { + LockNotPinnedObjectById(ProcedureRelationId, funcid); ObjectAddressSet(referenced, ProcedureRelationId, funcid); add_exact_object_address(&referenced, addrs); } diff --git a/src/backend/catalog/pg_operator.c b/src/backend/catalog/pg_operator.c index 6b90c774c18..a222358d081 100644 --- a/src/backend/catalog/pg_operator.c +++ b/src/backend/catalog/pg_operator.c @@ -654,6 +654,7 @@ get_other_operator(List *otherOp, Oid otherLeftTypeId, Oid otherRightTypeId, /* not in catalogs, different from operator, so make shell */ + LockNotPinnedObjectById(NamespaceRelationId, otherNamespace); aclresult = object_aclcheck(NamespaceRelationId, otherNamespace, GetUserId(), ACL_CREATE); if (aclresult != ACLCHECK_OK) @@ -876,6 +877,7 @@ makeOperatorDependencies(HeapTuple tuple, /* Dependency on namespace */ if (OidIsValid(oper->oprnamespace)) { + LockNotPinnedObjectById(NamespaceRelationId, oper->oprnamespace); ObjectAddressSet(referenced, NamespaceRelationId, oper->oprnamespace); add_exact_object_address(&referenced, addrs); } diff --git a/src/backend/commands/aggregatecmds.c b/src/backend/commands/aggregatecmds.c index 41b45dc6402..c2fb111daf3 100644 --- a/src/backend/commands/aggregatecmds.c +++ b/src/backend/commands/aggregatecmds.c @@ -22,6 +22,7 @@ */ #include "postgres.h" +#include "catalog/dependency.h" #include "catalog/namespace.h" #include "catalog/pg_aggregate.h" #include "catalog/pg_namespace.h" @@ -101,6 +102,7 @@ DefineAggregate(ParseState *pstate, aggNamespace = QualifiedNameGetCreationNamespace(name, &aggName); /* Check we have creation rights in target namespace */ + LockNotPinnedObjectById(NamespaceRelationId, aggNamespace); aclresult = object_aclcheck(NamespaceRelationId, aggNamespace, GetUserId(), ACL_CREATE); if (aclresult != ACLCHECK_OK) aclcheck_error(aclresult, OBJECT_SCHEMA, diff --git a/src/backend/commands/alter.c b/src/backend/commands/alter.c index 74ceb5fe20d..03516cb0d2e 100644 --- a/src/backend/commands/alter.c +++ b/src/backend/commands/alter.c @@ -221,6 +221,7 @@ AlterObjectRename_internal(Relation rel, Oid objectId, const char *new_name) /* User must have CREATE privilege on the namespace */ if (OidIsValid(namespaceId)) { + LockNotPinnedObjectById(NamespaceRelationId, namespaceId); aclresult = object_aclcheck(NamespaceRelationId, namespaceId, GetUserId(), ACL_CREATE); if (aclresult != ACLCHECK_OK) @@ -752,6 +753,7 @@ AlterObjectNamespace_internal(Relation rel, Oid objid, Oid nspOid) NameStr(*(DatumGetName(name)))); /* User must have CREATE privilege on new namespace */ + LockNotPinnedObjectById(NamespaceRelationId, nspOid); aclresult = object_aclcheck(NamespaceRelationId, nspOid, GetUserId(), ACL_CREATE); if (aclresult != ACLCHECK_OK) aclcheck_error(aclresult, OBJECT_SCHEMA, @@ -1014,6 +1016,7 @@ AlterObjectOwner_internal(Oid classId, Oid objectId, Oid new_ownerId) { AclResult aclresult; + LockNotPinnedObjectById(NamespaceRelationId, namespaceId); aclresult = object_aclcheck(NamespaceRelationId, namespaceId, new_ownerId, ACL_CREATE); if (aclresult != ACLCHECK_OK) diff --git a/src/backend/commands/collationcmds.c b/src/backend/commands/collationcmds.c index 0bc31ec2b6f..fa5dad1aa1f 100644 --- a/src/backend/commands/collationcmds.c +++ b/src/backend/commands/collationcmds.c @@ -21,6 +21,7 @@ #include "access/htup_details.h" #include "access/table.h" #include "access/xact.h" +#include "catalog/dependency.h" #include "catalog/indexing.h" #include "catalog/namespace.h" #include "catalog/objectaccess.h" @@ -82,6 +83,7 @@ DefineCollation(ParseState *pstate, List *names, List *parameters, bool if_not_e collNamespace = QualifiedNameGetCreationNamespace(names, &collName); + LockNotPinnedObjectById(NamespaceRelationId, collNamespace); aclresult = object_aclcheck(NamespaceRelationId, collNamespace, GetUserId(), ACL_CREATE); if (aclresult != ACLCHECK_OK) aclcheck_error(aclresult, OBJECT_SCHEMA, diff --git a/src/backend/commands/conversioncmds.c b/src/backend/commands/conversioncmds.c index 5f2022d3072..d60ecdb711a 100644 --- a/src/backend/commands/conversioncmds.c +++ b/src/backend/commands/conversioncmds.c @@ -14,6 +14,7 @@ */ #include "postgres.h" +#include "catalog/dependency.h" #include "catalog/pg_conversion.h" #include "catalog/pg_namespace.h" #include "catalog/pg_proc.h" @@ -50,6 +51,7 @@ CreateConversionCommand(CreateConversionStmt *stmt) &conversion_name); /* Check we have creation rights in target namespace */ + LockNotPinnedObjectById(NamespaceRelationId, namespaceId); aclresult = object_aclcheck(NamespaceRelationId, namespaceId, GetUserId(), ACL_CREATE); if (aclresult != ACLCHECK_OK) aclcheck_error(aclresult, OBJECT_SCHEMA, @@ -97,6 +99,7 @@ CreateConversionCommand(CreateConversionStmt *stmt) NameListToString(func_name), "integer"))); /* Check we have EXECUTE rights for the function */ + LockNotPinnedObjectById(ProcedureRelationId, funcoid); aclresult = object_aclcheck(ProcedureRelationId, funcoid, GetUserId(), ACL_EXECUTE); if (aclresult != ACLCHECK_OK) aclcheck_error(aclresult, OBJECT_FUNCTION, diff --git a/src/backend/commands/extension.c b/src/backend/commands/extension.c index a330b5fd6ce..4e82a010788 100644 --- a/src/backend/commands/extension.c +++ b/src/backend/commands/extension.c @@ -3283,6 +3283,7 @@ AlterExtensionNamespace(const char *extensionName, const char *newschema, Oid *o extensionName); /* Permission check: must have creation rights in target namespace */ + LockNotPinnedObjectById(NamespaceRelationId, nspOid); aclresult = object_aclcheck(NamespaceRelationId, nspOid, GetUserId(), ACL_CREATE); if (aclresult != ACLCHECK_OK) aclcheck_error(aclresult, OBJECT_SCHEMA, newschema); diff --git a/src/backend/commands/foreigncmds.c b/src/backend/commands/foreigncmds.c index c4852be2eb2..dd31e260739 100644 --- a/src/backend/commands/foreigncmds.c +++ b/src/backend/commands/foreigncmds.c @@ -377,6 +377,7 @@ AlterForeignServerOwner_internal(Relation rel, HeapTuple tup, Oid newOwnerId) check_can_set_role(GetUserId(), newOwnerId); /* New owner must have USAGE privilege on foreign-data wrapper */ + LockNotPinnedObjectById(ForeignDataWrapperRelationId, form->srvfdw); aclresult = object_aclcheck(ForeignDataWrapperRelationId, form->srvfdw, newOwnerId, ACL_USAGE); if (aclresult != ACLCHECK_OK) { @@ -997,6 +998,7 @@ CreateForeignServer(CreateForeignServerStmt *stmt) */ fdw = GetForeignDataWrapperByName(stmt->fdwname, false); + LockNotPinnedObjectById(ForeignDataWrapperRelationId, fdw->fdwid); aclresult = object_aclcheck(ForeignDataWrapperRelationId, fdw->fdwid, ownerId, ACL_USAGE); if (aclresult != ACLCHECK_OK) aclcheck_error(aclresult, OBJECT_FDW, fdw->fdwname); @@ -1188,6 +1190,7 @@ user_mapping_ddl_aclcheck(Oid umuserid, Oid serverid, const char *servername) { AclResult aclresult; + LockNotPinnedObjectById(ForeignServerRelationId, serverid); aclresult = object_aclcheck(ForeignServerRelationId, serverid, curuserid, ACL_USAGE); if (aclresult != ACLCHECK_OK) aclcheck_error(aclresult, OBJECT_FOREIGN_SERVER, servername); @@ -1539,6 +1542,7 @@ CreateForeignTable(CreateForeignTableStmt *stmt, Oid relid) * get the actual FDW for option validation etc. */ server = GetForeignServerByName(stmt->servername, false); + LockNotPinnedObjectById(ForeignServerRelationId, server->serverid); aclresult = object_aclcheck(ForeignServerRelationId, server->serverid, ownerId, ACL_USAGE); if (aclresult != ACLCHECK_OK) aclcheck_error(aclresult, OBJECT_FOREIGN_SERVER, server->servername); @@ -1598,6 +1602,7 @@ ImportForeignSchema(ImportForeignSchemaStmt *stmt) /* Check that the foreign server exists and that we have USAGE on it */ server = GetForeignServerByName(stmt->server_name, false); + LockNotPinnedObjectById(ForeignServerRelationId, server->serverid); aclresult = object_aclcheck(ForeignServerRelationId, server->serverid, GetUserId(), ACL_USAGE); if (aclresult != ACLCHECK_OK) aclcheck_error(aclresult, OBJECT_FOREIGN_SERVER, server->servername); diff --git a/src/backend/commands/functioncmds.c b/src/backend/commands/functioncmds.c index 3afd762e9dc..9aec534c390 100644 --- a/src/backend/commands/functioncmds.c +++ b/src/backend/commands/functioncmds.c @@ -146,6 +146,7 @@ compute_return_type(TypeName *returnType, Oid languageOid, errdetail("Creating a shell type definition."))); namespaceId = QualifiedNameGetCreationNamespace(returnType->names, &typname); + LockNotPinnedObjectById(NamespaceRelationId, namespaceId); aclresult = object_aclcheck(NamespaceRelationId, namespaceId, GetUserId(), ACL_CREATE); if (aclresult != ACLCHECK_OK) @@ -158,6 +159,7 @@ compute_return_type(TypeName *returnType, Oid languageOid, CommandCounterIncrement(); } + LockNotPinnedObjectById(TypeRelationId, rettype); aclresult = object_aclcheck(TypeRelationId, rettype, GetUserId(), ACL_USAGE); if (aclresult != ACLCHECK_OK) aclcheck_error_type(aclresult, rettype); @@ -274,6 +276,7 @@ interpret_function_parameter_list(ParseState *pstate, toid = InvalidOid; /* keep compiler quiet */ } + LockNotPinnedObjectById(TypeRelationId, toid); aclresult = object_aclcheck(TypeRelationId, toid, GetUserId(), ACL_USAGE); if (aclresult != ACLCHECK_OK) aclcheck_error_type(aclresult, toid); @@ -1071,6 +1074,7 @@ CreateFunction(ParseState *pstate, CreateFunctionStmt *stmt) &funcname); /* Check we have creation rights in target namespace */ + LockNotPinnedObjectById(NamespaceRelationId, namespaceId); aclresult = object_aclcheck(NamespaceRelationId, namespaceId, GetUserId(), ACL_CREATE); if (aclresult != ACLCHECK_OK) aclcheck_error(aclresult, OBJECT_SCHEMA, @@ -1125,6 +1129,7 @@ CreateFunction(ParseState *pstate, CreateFunctionStmt *stmt) if (languageStruct->lanpltrusted) { /* if trusted language, need USAGE privilege */ + LockNotPinnedObjectById(LanguageRelationId, languageOid); aclresult = object_aclcheck(LanguageRelationId, languageOid, GetUserId(), ACL_USAGE); if (aclresult != ACLCHECK_OK) aclcheck_error(aclresult, OBJECT_LANGUAGE, @@ -1582,10 +1587,12 @@ CreateCast(CreateCastStmt *stmt) format_type_be(sourcetypeid), format_type_be(targettypeid)))); + LockNotPinnedObjectById(TypeRelationId, sourcetypeid); aclresult = object_aclcheck(TypeRelationId, sourcetypeid, GetUserId(), ACL_USAGE); if (aclresult != ACLCHECK_OK) aclcheck_error_type(aclresult, sourcetypeid); + LockNotPinnedObjectById(TypeRelationId, targettypeid); aclresult = object_aclcheck(TypeRelationId, targettypeid, GetUserId(), ACL_USAGE); if (aclresult != ACLCHECK_OK) aclcheck_error_type(aclresult, targettypeid); @@ -1874,6 +1881,7 @@ CreateTransform(CreateTransformStmt *stmt) if (!object_ownercheck(TypeRelationId, typeid, GetUserId())) aclcheck_error_type(ACLCHECK_NOT_OWNER, typeid); + LockNotPinnedObjectById(TypeRelationId, typeid); aclresult = object_aclcheck(TypeRelationId, typeid, GetUserId(), ACL_USAGE); if (aclresult != ACLCHECK_OK) aclcheck_error_type(aclresult, typeid); @@ -1883,6 +1891,7 @@ CreateTransform(CreateTransformStmt *stmt) */ langid = get_language_oid(stmt->lang, false); + LockNotPinnedObjectById(LanguageRelationId, langid); aclresult = object_aclcheck(LanguageRelationId, langid, GetUserId(), ACL_USAGE); if (aclresult != ACLCHECK_OK) aclcheck_error(aclresult, OBJECT_LANGUAGE, stmt->lang); @@ -1897,6 +1906,7 @@ CreateTransform(CreateTransformStmt *stmt) if (!object_ownercheck(ProcedureRelationId, fromsqlfuncid, GetUserId())) aclcheck_error(ACLCHECK_NOT_OWNER, OBJECT_FUNCTION, NameListToString(stmt->fromsql->objname)); + LockNotPinnedObjectById(ProcedureRelationId, fromsqlfuncid); aclresult = object_aclcheck(ProcedureRelationId, fromsqlfuncid, GetUserId(), ACL_EXECUTE); if (aclresult != ACLCHECK_OK) aclcheck_error(aclresult, OBJECT_FUNCTION, NameListToString(stmt->fromsql->objname)); @@ -1923,6 +1933,7 @@ CreateTransform(CreateTransformStmt *stmt) if (!object_ownercheck(ProcedureRelationId, tosqlfuncid, GetUserId())) aclcheck_error(ACLCHECK_NOT_OWNER, OBJECT_FUNCTION, NameListToString(stmt->tosql->objname)); + LockNotPinnedObjectById(ProcedureRelationId, tosqlfuncid); aclresult = object_aclcheck(ProcedureRelationId, tosqlfuncid, GetUserId(), ACL_EXECUTE); if (aclresult != ACLCHECK_OK) aclcheck_error(aclresult, OBJECT_FUNCTION, NameListToString(stmt->tosql->objname)); diff --git a/src/backend/commands/indexcmds.c b/src/backend/commands/indexcmds.c index 9ab74c8df0a..6216ab2a5f5 100644 --- a/src/backend/commands/indexcmds.c +++ b/src/backend/commands/indexcmds.c @@ -25,6 +25,7 @@ #include "access/tableam.h" #include "access/xact.h" #include "catalog/catalog.h" +#include "catalog/dependency.h" #include "catalog/index.h" #include "catalog/indexing.h" #include "catalog/namespace.h" @@ -770,6 +771,7 @@ DefineIndex(ParseState *pstate, { AclResult aclresult; + LockNotPinnedObjectById(NamespaceRelationId, namespaceId); aclresult = object_aclcheck(NamespaceRelationId, namespaceId, root_save_userid, ACL_CREATE); if (aclresult != ACLCHECK_OK) diff --git a/src/backend/commands/opclasscmds.c b/src/backend/commands/opclasscmds.c index 7493a9ccc06..ad71ee53cb2 100644 --- a/src/backend/commands/opclasscmds.c +++ b/src/backend/commands/opclasscmds.c @@ -363,6 +363,7 @@ DefineOpClass(CreateOpClassStmt *stmt) &opcname); /* Check we have creation rights in target namespace */ + LockNotPinnedObjectById(NamespaceRelationId, namespaceoid); aclresult = object_aclcheck(NamespaceRelationId, namespaceoid, GetUserId(), ACL_CREATE); if (aclresult != ACLCHECK_OK) aclcheck_error(aclresult, OBJECT_SCHEMA, @@ -801,6 +802,7 @@ DefineOpFamily(CreateOpFamilyStmt *stmt) &opfname); /* Check we have creation rights in target namespace */ + LockNotPinnedObjectById(NamespaceRelationId, namespaceoid); aclresult = object_aclcheck(NamespaceRelationId, namespaceoid, GetUserId(), ACL_CREATE); if (aclresult != ACLCHECK_OK) aclcheck_error(aclresult, OBJECT_SCHEMA, diff --git a/src/backend/commands/operatorcmds.c b/src/backend/commands/operatorcmds.c index 3e7b09b3494..bb2ce833bdd 100644 --- a/src/backend/commands/operatorcmds.c +++ b/src/backend/commands/operatorcmds.c @@ -33,6 +33,7 @@ #include "access/htup_details.h" #include "access/table.h" +#include "catalog/dependency.h" #include "catalog/indexing.h" #include "catalog/objectaccess.h" #include "catalog/pg_namespace.h" @@ -92,6 +93,7 @@ DefineOperator(List *names, List *parameters) oprNamespace = QualifiedNameGetCreationNamespace(names, &oprName); /* Check we have creation rights in target namespace */ + LockNotPinnedObjectById(NamespaceRelationId, oprNamespace); aclresult = object_aclcheck(NamespaceRelationId, oprNamespace, GetUserId(), ACL_CREATE); if (aclresult != ACLCHECK_OK) aclcheck_error(aclresult, OBJECT_SCHEMA, @@ -189,6 +191,7 @@ DefineOperator(List *names, List *parameters) if (typeName1) { + LockNotPinnedObjectById(TypeRelationId, typeId1); aclresult = object_aclcheck(TypeRelationId, typeId1, GetUserId(), ACL_USAGE); if (aclresult != ACLCHECK_OK) aclcheck_error_type(aclresult, typeId1); @@ -196,6 +199,7 @@ DefineOperator(List *names, List *parameters) if (typeName2) { + LockNotPinnedObjectById(TypeRelationId, typeId2); aclresult = object_aclcheck(TypeRelationId, typeId2, GetUserId(), ACL_USAGE); if (aclresult != ACLCHECK_OK) aclcheck_error_type(aclresult, typeId2); @@ -227,12 +231,14 @@ DefineOperator(List *names, List *parameters) * necessary, since EXECUTE will be checked at any attempted use of the * operator, but it seems like a good idea anyway. */ + LockNotPinnedObjectById(ProcedureRelationId, functionOid); aclresult = object_aclcheck(ProcedureRelationId, functionOid, GetUserId(), ACL_EXECUTE); if (aclresult != ACLCHECK_OK) aclcheck_error(aclresult, OBJECT_FUNCTION, NameListToString(functionName)); rettype = get_func_rettype(functionOid); + LockNotPinnedObjectById(TypeRelationId, rettype); aclresult = object_aclcheck(TypeRelationId, rettype, GetUserId(), ACL_USAGE); if (aclresult != ACLCHECK_OK) aclcheck_error_type(aclresult, rettype); @@ -312,6 +318,7 @@ ValidateRestrictionEstimator(List *restrictionName) { AclResult aclresult; + LockNotPinnedObjectById(ProcedureRelationId, restrictionOid); aclresult = object_aclcheck(ProcedureRelationId, restrictionOid, GetUserId(), ACL_EXECUTE); if (aclresult != ACLCHECK_OK) @@ -382,6 +389,7 @@ ValidateJoinEstimator(List *joinName) { AclResult aclresult; + LockNotPinnedObjectById(ProcedureRelationId, joinOid); aclresult = object_aclcheck(ProcedureRelationId, joinOid, GetUserId(), ACL_EXECUTE); if (aclresult != ACLCHECK_OK) diff --git a/src/backend/commands/statscmds.c b/src/backend/commands/statscmds.c index b354723be44..6afef0f55c4 100644 --- a/src/backend/commands/statscmds.c +++ b/src/backend/commands/statscmds.c @@ -185,6 +185,7 @@ CreateStatistics(CreateStatsStmt *stmt, bool check_rights) { AclResult aclresult; + LockNotPinnedObjectById(NamespaceRelationId, namespaceId); aclresult = object_aclcheck(NamespaceRelationId, namespaceId, GetUserId(), ACL_CREATE); if (aclresult != ACLCHECK_OK) diff --git a/src/backend/commands/subscriptioncmds.c b/src/backend/commands/subscriptioncmds.c index 1e10d9d9a58..560f8bff629 100644 --- a/src/backend/commands/subscriptioncmds.c +++ b/src/backend/commands/subscriptioncmds.c @@ -745,6 +745,7 @@ CreateSubscription(ParseState *pstate, CreateSubscriptionStmt *stmt, conninfo = NULL; server = GetForeignServerByName(stmt->servername, false); + LockNotPinnedObjectById(ForeignServerRelationId, server->serverid); aclresult = object_aclcheck(ForeignServerRelationId, server->serverid, owner, ACL_USAGE); if (aclresult != ACLCHECK_OK) aclcheck_error(aclresult, OBJECT_FOREIGN_SERVER, server->servername); @@ -1833,6 +1834,7 @@ AlterSubscription(ParseState *pstate, AlterSubscriptionStmt *stmt, * the server. */ new_server = GetForeignServerByName(stmt->servername, false); + LockNotPinnedObjectById(ForeignServerRelationId, new_server->serverid); aclresult = object_aclcheck(ForeignServerRelationId, new_server->serverid, form->subowner, ACL_USAGE); @@ -2253,6 +2255,7 @@ DropSubscription(DropSubscriptionStmt *stmt, bool isTopLevel) ForeignServer *server; server = GetForeignServer(form->subserver); + LockNotPinnedObjectById(ForeignServerRelationId, form->subserver); aclresult = object_aclcheck(ForeignServerRelationId, form->subserver, form->subowner, ACL_USAGE); if (aclresult != ACLCHECK_OK) @@ -2597,6 +2600,7 @@ AlterSubscriptionOwner_internal(Relation rel, HeapTuple tup, Oid newOwnerId) { ForeignServer *server = GetForeignServer(form->subserver); + LockNotPinnedObjectById(ForeignServerRelationId, server->serverid); aclresult = object_aclcheck(ForeignServerRelationId, server->serverid, newOwnerId, ACL_USAGE); if (aclresult != ACLCHECK_OK) ereport(ERROR, diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c index d8d7969bf30..decd5071ea6 100644 --- a/src/backend/commands/tablecmds.c +++ b/src/backend/commands/tablecmds.c @@ -30,6 +30,7 @@ #include "access/xlog.h" #include "access/xloginsert.h" #include "catalog/catalog.h" +#include "catalog/dependency.h" #include "catalog/heap.h" #include "catalog/index.h" #include "catalog/namespace.h" @@ -997,6 +998,7 @@ DefineRelation(CreateStmt *stmt, char relkind, Oid ownerId, ofTypeId = typenameTypeId(NULL, stmt->ofTypename); + LockNotPinnedObjectById(TypeRelationId, ofTypeId); aclresult = object_aclcheck(TypeRelationId, ofTypeId, GetUserId(), ACL_USAGE); if (aclresult != ACLCHECK_OK) aclcheck_error_type(aclresult, ofTypeId); @@ -1462,6 +1464,7 @@ BuildDescForRelation(const List *columns) attname = entry->colname; typenameTypeIdAndMod(NULL, entry->typeName, &atttypid, &atttypmod); + LockNotPinnedObjectById(TypeRelationId, atttypid); aclresult = object_aclcheck(TypeRelationId, atttypid, GetUserId(), ACL_USAGE); if (aclresult != ACLCHECK_OK) aclcheck_error_type(aclresult, atttypid); @@ -13941,6 +13944,7 @@ checkFkeyPermissions(Relation rel, int16 *attnums, int natts) int i; /* Okay if we have relation-level REFERENCES permission */ + LockNotPinnedObjectById(RelationRelationId, RelationGetRelid(rel)); aclresult = pg_class_aclcheck(RelationGetRelid(rel), roleid, ACL_REFERENCES); if (aclresult == ACLCHECK_OK) @@ -14724,6 +14728,7 @@ ATPrepAlterColumnType(List **wqueue, /* Look up the target type */ typenameTypeIdAndMod(pstate, typeName, &targettype, &targettypmod); + LockNotPinnedObjectById(TypeRelationId, targettype); aclresult = object_aclcheck(TypeRelationId, targettype, GetUserId(), ACL_USAGE); if (aclresult != ACLCHECK_OK) aclcheck_error_type(aclresult, targettype); @@ -16476,6 +16481,7 @@ ATExecChangeOwner(Oid relationOid, Oid newOwnerId, bool recursing, LOCKMODE lock check_can_set_role(GetUserId(), newOwnerId); /* New owner must have CREATE privilege on namespace */ + LockNotPinnedObjectById(NamespaceRelationId, namespaceOid); aclresult = object_aclcheck(NamespaceRelationId, namespaceOid, newOwnerId, ACL_CREATE); if (aclresult != ACLCHECK_OK) @@ -19882,6 +19888,7 @@ RangeVarCallbackForAlterRelation(const RangeVar *rv, Oid relid, Oid oldrelid, */ if (IsA(stmt, RenameStmt)) { + LockNotPinnedObjectById(NamespaceRelationId, classform->relnamespace); aclresult = object_aclcheck(NamespaceRelationId, classform->relnamespace, GetUserId(), ACL_CREATE); if (aclresult != ACLCHECK_OK) diff --git a/src/backend/commands/trigger.c b/src/backend/commands/trigger.c index da0d1ba6791..dab6067bbf9 100644 --- a/src/backend/commands/trigger.c +++ b/src/backend/commands/trigger.c @@ -350,6 +350,7 @@ CreateTriggerFiringOn(const CreateTrigStmt *stmt, const char *queryString, if (OidIsValid(constrrelid)) { + LockNotPinnedObjectById(RelationRelationId, constrrelid); aclresult = pg_class_aclcheck(constrrelid, GetUserId(), ACL_TRIGGER); if (aclresult != ACLCHECK_OK) @@ -695,6 +696,7 @@ CreateTriggerFiringOn(const CreateTrigStmt *stmt, const char *queryString, funcoid = LookupFuncName(stmt->funcname, 0, NULL, false); if (!isInternal) { + LockNotPinnedObjectById(ProcedureRelationId, funcoid); aclresult = object_aclcheck(ProcedureRelationId, funcoid, GetUserId(), ACL_EXECUTE); if (aclresult != ACLCHECK_OK) aclcheck_error(aclresult, OBJECT_FUNCTION, diff --git a/src/backend/commands/tsearchcmds.c b/src/backend/commands/tsearchcmds.c index a12ce33bae4..eb9e68bbb91 100644 --- a/src/backend/commands/tsearchcmds.c +++ b/src/backend/commands/tsearchcmds.c @@ -414,6 +414,7 @@ DefineTSDictionary(List *names, List *parameters) namespaceoid = QualifiedNameGetCreationNamespace(names, &dictname); /* Check we have creation rights in target namespace */ + LockNotPinnedObjectById(NamespaceRelationId, namespaceoid); aclresult = object_aclcheck(NamespaceRelationId, namespaceoid, GetUserId(), ACL_CREATE); if (aclresult != ACLCHECK_OK) aclcheck_error(aclresult, OBJECT_SCHEMA, @@ -917,6 +918,7 @@ DefineTSConfiguration(List *names, List *parameters, ObjectAddress *copied) namespaceoid = QualifiedNameGetCreationNamespace(names, &cfgname); /* Check we have creation rights in target namespace */ + LockNotPinnedObjectById(NamespaceRelationId, namespaceoid); aclresult = object_aclcheck(NamespaceRelationId, namespaceoid, GetUserId(), ACL_CREATE); if (aclresult != ACLCHECK_OK) aclcheck_error(aclresult, OBJECT_SCHEMA, diff --git a/src/backend/commands/typecmds.c b/src/backend/commands/typecmds.c index cd38e9cddf4..d5e76fbb241 100644 --- a/src/backend/commands/typecmds.c +++ b/src/backend/commands/typecmds.c @@ -39,6 +39,7 @@ #include "access/xact.h" #include "catalog/binary_upgrade.h" #include "catalog/catalog.h" +#include "catalog/dependency.h" #include "catalog/heap.h" #include "catalog/objectaccess.h" #include "catalog/pg_am.h" @@ -739,6 +740,7 @@ DefineDomain(ParseState *pstate, CreateDomainStmt *stmt) &domainName); /* Check we have creation rights in target namespace */ + LockNotPinnedObjectById(NamespaceRelationId, domainNamespace); aclresult = object_aclcheck(NamespaceRelationId, domainNamespace, GetUserId(), ACL_CREATE); if (aclresult != ACLCHECK_OK) @@ -788,6 +790,7 @@ DefineDomain(ParseState *pstate, CreateDomainStmt *stmt) TypeNameToString(stmt->typeName)), parser_errposition(pstate, stmt->typeName->location))); + LockNotPinnedObjectById(TypeRelationId, basetypeoid); aclresult = object_aclcheck(TypeRelationId, basetypeoid, GetUserId(), ACL_USAGE); if (aclresult != ACLCHECK_OK) aclcheck_error_type(aclresult, basetypeoid); @@ -1195,6 +1198,7 @@ DefineEnum(CreateEnumStmt *stmt) &enumName); /* Check we have creation rights in target namespace */ + LockNotPinnedObjectById(NamespaceRelationId, enumNamespace); aclresult = object_aclcheck(NamespaceRelationId, enumNamespace, GetUserId(), ACL_CREATE); if (aclresult != ACLCHECK_OK) aclcheck_error(aclresult, OBJECT_SCHEMA, @@ -1420,6 +1424,7 @@ DefineRange(ParseState *pstate, CreateRangeStmt *stmt) &typeName); /* Check we have creation rights in target namespace */ + LockNotPinnedObjectById(NamespaceRelationId, typeNamespace); aclresult = object_aclcheck(NamespaceRelationId, typeNamespace, GetUserId(), ACL_CREATE); if (aclresult != ACLCHECK_OK) aclcheck_error(aclresult, OBJECT_SCHEMA, @@ -2414,6 +2419,7 @@ findRangeCanonicalFunction(List *procname, Oid typeOid) func_signature_string(procname, 1, NIL, argList)))); /* Also, range type's creator must have permission to call function */ + LockNotPinnedObjectById(ProcedureRelationId, procOid); aclresult = object_aclcheck(ProcedureRelationId, procOid, GetUserId(), ACL_EXECUTE); if (aclresult != ACLCHECK_OK) aclcheck_error(aclresult, OBJECT_FUNCTION, get_func_name(procOid)); @@ -2457,6 +2463,7 @@ findRangeSubtypeDiffFunction(List *procname, Oid subtype) func_signature_string(procname, 2, NIL, argList)))); /* Also, range type's creator must have permission to call function */ + LockNotPinnedObjectById(ProcedureRelationId, procOid); aclresult = object_aclcheck(ProcedureRelationId, procOid, GetUserId(), ACL_EXECUTE); if (aclresult != ACLCHECK_OK) aclcheck_error(aclresult, OBJECT_FUNCTION, get_func_name(procOid)); @@ -3956,6 +3963,7 @@ AlterTypeOwner(List *names, Oid newOwnerId, ObjectType objecttype) check_can_set_role(GetUserId(), newOwnerId); /* New owner must have CREATE privilege on namespace */ + LockNotPinnedObjectById(NamespaceRelationId, typTup->typnamespace); aclresult = object_aclcheck(NamespaceRelationId, typTup->typnamespace, newOwnerId, ACL_CREATE); diff --git a/src/include/catalog/dependency.h b/src/include/catalog/dependency.h index fa508ea70c6..ac1d902e912 100644 --- a/src/include/catalog/dependency.h +++ b/src/include/catalog/dependency.h @@ -102,6 +102,7 @@ typedef struct ObjectAddresses ObjectAddresses; extern void AcquireDeletionLock(const ObjectAddress *object, int flags); extern void LockNotPinnedObject(const ObjectAddress *object); +extern void LockNotPinnedObjectById(Oid classid, Oid objid); extern bool isObjectPinned(const ObjectAddress *object); extern void ReleaseDeletionLock(const ObjectAddress *object); -- 2.34.1 --zB/Wek73NRZcta1g Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v20-0003-Add-Assert-guard-to-detect-permission-check-befo.patch" Content-Transfer-Encoding: 8bit ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
* [PATCH v6a 3/5] disable cirrus @ 2026-05-28 17:31 Andres Freund <[email protected]> 0 siblings, 0 replies; 135+ messages in thread From: Andres Freund @ 2026-05-28 17:31 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch-through: --- .cirrus.yml | 91 ---- .cirrus.star | 143 ------- .cirrus.tasks.yml | 1022 --------------------------------------------- 3 files changed, 1256 deletions(-) delete mode 100644 .cirrus.yml delete mode 100644 .cirrus.star delete mode 100644 .cirrus.tasks.yml diff --git a/.cirrus.yml b/.cirrus.yml deleted file mode 100644 index 3f75852e84e..00000000000 --- a/.cirrus.yml +++ /dev/null @@ -1,91 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute -# resources for CI configurable on a repository level, the "final" CI -# configuration is the combination of: -# -# 1) the contents of this file -# -# 2) computed environment variables -# -# Used to enable/disable tasks based on the execution environment. See -# .cirrus.star: compute_environment_vars() -# -# 3) if defined, the contents of the file referenced by the, repository -# level, REPO_CI_CONFIG_GIT_URL variable (see -# https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted -# format) -# -# This allows running tasks in a different execution environment than the -# default, e.g. to have sufficient resources for cfbot. -# -# 4) .cirrus.tasks.yml -# -# This composition is done by .cirrus.star - - -env: - # Source of images / containers - GCP_PROJECT: pg-ci-images - IMAGE_PROJECT: $GCP_PROJECT - CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci - DISK_SIZE: 25 - - -# Define how to run various types of tasks. - -# VMs provided by cirrus-ci. Each user has a limited number of "free" credits -# for testing. -cirrus_community_vm_template: &cirrus_community_vm_template - compute_engine_instance: - image_project: $IMAGE_PROJECT - image: family/$IMAGE_FAMILY - platform: $PLATFORM - cpu: $CPUS - disk: $DISK_SIZE - - -default_linux_task_template: &linux_task_template - env: - PLATFORM: linux - <<: *cirrus_community_vm_template - - -default_freebsd_task_template: &freebsd_task_template - env: - PLATFORM: freebsd - <<: *cirrus_community_vm_template - -default_netbsd_task_template: &netbsd_task_template - env: - PLATFORM: netbsd - <<: *cirrus_community_vm_template - -default_openbsd_task_template: &openbsd_task_template - env: - PLATFORM: openbsd - <<: *cirrus_community_vm_template - - -default_windows_task_template: &windows_task_template - env: - PLATFORM: windows - <<: *cirrus_community_vm_template - - -# macos workers provided by cirrus-ci -default_macos_task_template: &macos_task_template - env: - PLATFORM: macos - macos_instance: - image: $IMAGE - - -# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here, -# followed by the contents .cirrus.tasks.yml. This allows -# REPO_CI_CONFIG_GIT_URL to override how the task types above will be -# executed, e.g. using a custom compute account or permanent workers. diff --git a/.cirrus.star b/.cirrus.star deleted file mode 100644 index e9bb672b959..00000000000 --- a/.cirrus.star +++ /dev/null @@ -1,143 +0,0 @@ -"""Additional CI configuration, using the starlark language. See -https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark - -See also the starlark specification at -https://github.com/bazelbuild/starlark/blob/master/spec.md - -See also .cirrus.yml and src/tools/ci/README -""" - -load("cirrus", "env", "fs", "re", "yaml") - - -def main(): - """The main function is executed by cirrus-ci after loading .cirrus.yml and can - extend the CI definition further. - - As documented in .cirrus.yml, the final CI configuration is composed of - - 1) the contents of .cirrus.yml - - 2) computed environment variables - - 3) if defined, the contents of the file referenced by the, repository - level, REPO_CI_CONFIG_GIT_URL variable (see - https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted - format) - - 4) .cirrus.tasks.yml - """ - - output = "" - - # 1) is evaluated implicitly - - - # Add 2) - additional_env = compute_environment_vars() - env_fmt = """ -### -# Computed environment variables start here -### -{0} -### -# Computed environment variables end here -### -""" - output += env_fmt.format(yaml.dumps({'env': additional_env})) - - - # Add 3) - repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL") - if repo_config_url != None: - print("loading additional configuration from \"{}\"".format(repo_config_url)) - output += config_from(repo_config_url) - else: - output += "\n# REPO_CI_CONFIG_URL was not set\n" - - - # Add 4) - output += config_from(".cirrus.tasks.yml") - - - return output - - -def compute_environment_vars(): - cenv = {} - - ### - # Some tasks are manually triggered by default because they might use too - # many resources for users of free Cirrus credits, but they can be - # triggered automatically by naming them in an environment variable e.g. - # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository - # Settings" on Cirrus CI's website. - - default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd'] - - repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '') - for task in default_manual_trigger_tasks: - name = 'CI_TRIGGER_TYPE_' + task.upper() - if repo_ci_automatic_trigger_tasks.find(task) != -1: - value = 'automatic' - else: - value = 'manual' - cenv[name] = value - ### - - ### - # Parse "ci-os-only:" tag in commit message and set - # CI_{$OS}_ENABLED variable for each OS - - # We want to disable SanityCheck if testing just a specific OS. This - # shortens push-wait-for-ci cycle time a bit when debugging operating - # system specific failures. Just treating it as an OS in that case - # suffices. - - operating_systems = [ - 'compilerwarnings', - 'freebsd', - 'linux', - 'macos', - 'mingw', - 'netbsd', - 'openbsd', - 'sanitycheck', - 'windows', - ] - commit_message = env.get('CIRRUS_CHANGE_MESSAGE') - match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)" - - # re.match() returns an array with a tuple of (matched-string, match_1, ...) - m = re.match(match_re, commit_message) - if m and len(m) > 0: - os_only = m[0][2] - os_only_list = re.split(r'[, ]+', os_only) - else: - os_only_list = operating_systems - - for os in operating_systems: - os_enabled = os in os_only_list - cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled - ### - - return cenv - - -def config_from(config_src): - """return contents of config file `config_src`, surrounded by markers - indicating start / end of the included file - """ - - config_contents = fs.read(config_src) - config_fmt = """ - -### -# contents of config file `{0}` start here -### -{1} -### -# contents of config file `{0}` end here -### -""" - return config_fmt.format(config_src, config_contents) diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml deleted file mode 100644 index 8683d1ae9c7..00000000000 --- a/.cirrus.tasks.yml +++ /dev/null @@ -1,1022 +0,0 @@ -# CI configuration file for CI utilizing cirrus-ci.org -# -# For instructions on how to enable the CI integration in a repository and -# further details, see src/tools/ci/README -# -# -# NB: Different tasks intentionally test with different, non-default, -# configurations, to increase the chance of catching problems. Each task with -# non-obvious non-default documents their oddity at the top of the task, -# prefixed by "SPECIAL:". - - -env: - # The lower depth accelerates git clone. Use a bit of depth so that - # concurrent tasks and retrying older jobs have a chance of working. - CIRRUS_CLONE_DEPTH: 500 - # Useful to be able to analyse what in a script takes long - CIRRUS_LOG_TIMESTAMP: true - - CCACHE_MAXSIZE: "250M" - - # target to test, for all but windows - CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS - CHECKFLAGS: -Otarget - PROVE_FLAGS: --timer - # Build test dependencies as part of the build step, to see compiler - # errors/warnings in one place. - MBUILD_TARGET: all testprep - MTEST_ARGS: --print-errorlogs --no-rebuild -C build - PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests - TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf - PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth - - # Postgres config args for the meson builds, shared between all meson tasks - # except the 'SanityCheck' task - MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true - - # Meson feature flags shared by all meson tasks, except: - # SanityCheck: uses almost no dependencies. - # Windows - VS: has fewer dependencies than listed here, so defines its own. - # Linux: uses the 'auto' feature option to test meson feature autodetection. - MESON_COMMON_FEATURES: >- - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - -Ddocs=enabled - -Dicu=enabled - -Dlibxml=enabled - -Dlibxslt=enabled - -Dlz4=enabled - -Dpltcl=enabled - -Dreadline=enabled - -Dzlib=enabled - -Dzstd=enabled - - -# What files to preserve in case tests fail -on_failure_ac: &on_failure_ac - log_artifacts: - paths: - - "**/*.log" - - "**/*.diffs" - - "**/regress_log_*" - type: text/plain - -on_failure_meson: &on_failure_meson - testrun_artifacts: - paths: - - "build*/testrun/**/*.log" - - "build*/testrun/**/*.diffs" - - "build*/testrun/**/regress_log_*" - type: text/plain - - # In theory it'd be nice to upload the junit files meson generates, so that - # cirrus will nicely annotate the commit. Unfortunately the files don't - # contain identifiable file + line numbers right now, so the annotations - # don't end up useful. We could probably improve on that with a some custom - # conversion script, but ... - meson_log_artifacts: - path: "build*/meson-logs/*.txt" - type: text/plain - - -# To avoid unnecessarily spinning up a lot of VMs / containers for entirely -# broken commits, have a minimal task that all others depend on. -# -# SPECIAL: -# - Builds with --auto-features=disabled and thus almost no enabled -# dependencies -task: - name: SanityCheck - - # If a specific OS is requested, don't run the sanity check. This shortens - # push-wait-for-ci cycle time a bit when debugging operating system specific - # failures. Uses skip instead of only_if, as cirrus otherwise warns about - # only_if conditions not matching. - skip: $CI_SANITYCHECK_ENABLED == false - - env: - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-trixie - CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir - # no options enabled, should be small - CCACHE_MAXSIZE: "150M" - - # While containers would start up a bit quicker, building is a bit - # slower. This way we don't have to maintain a container image. - <<: *linux_task_template - - ccache_cache: - folder: $CCACHE_DIR - - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - # Can't change container's kernel.core_pattern. Postgres user can't write - # to / normally. Change that. - chown root:postgres / - chmod g+rwx / - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - --buildtype=debug \ - --auto-features=disabled \ - -Ddefault_library=shared \ - -Dtap_tests=enabled \ - build - EOF - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - EOF - upload_caches: ccache - - # Run a minimal set of tests. The main regression tests take too long for - # this purpose. For now this is a random quick pg_regress style test, and a - # tap test that exercises both a frontend binary and the backend. - test_minimal_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --suite setup - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \ - cube/regress pg_ctl/001_start_stop - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - mkdir -m 770 /tmp/cores - find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \; - src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# SPECIAL: -# - Uses postgres specific CPPFLAGS that increase test coverage -# - Specifies configuration options that test reading/writing/copying of node trees -# - Specifies debug_parallel_query=regress, to catch related issues during CI -# - Also runs tests against a running postgres instance, see test_running_script -task: - name: FreeBSD - Meson - - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 - IMAGE_FAMILY: pg-ci-freebsd - DISK_SIZE: 50 - - CCACHE_DIR: /tmp/ccache_dir - CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS - CFLAGS: -Og -ggdb - - # Several buildfarm animals enable these options. Without testing them - # during CI, it would be easy to cause breakage on the buildfarm with CI - # passing. - PG_TEST_INITDB_EXTRA_OPTS: >- - -c debug_copy_parse_plan_trees=on - -c debug_write_read_parse_plan_trees=on - -c debug_raw_expression_coverage_test=on - -c debug_parallel_query=regress - PG_TEST_PG_UPGRADE_MODE: --link - - MESON_FEATURES: >- - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - -Dtcl_version=tcl86 - -Duuid=bsd - - <<: *freebsd_task_template - - depends_on: SanityCheck - only_if: $CI_FREEBSD_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - pw useradd postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kern.corefile='/tmp/cores/%N.%P.core' - setup_additional_packages_script: | - #pkg install -y ... - - # NB: Intentionally build without -Dllvm. The freebsd image size is already - # large enough to make VM startup slow, and even without llvm freebsd - # already takes longer than other platforms except for windows. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - # test runningcheck, freebsd chosen because it's currently fast enough - test_running_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --quiet --suite setup - export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH" - mkdir -p build/testrun - build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust - echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf - build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop - EOF - - on_failure: - # if the server continues running, it often causes cirrus-ci to fail - # during upload, as it doesn't expect artifacts to change size - stop_running_script: | - su postgres <<-EOF - set -e - build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true - EOF - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores - - -task: - depends_on: SanityCheck - - env: - # Below are experimentally derived to be a decent choice. - CPUS: 4 - BUILD_JOBS: 8 - TEST_JOBS: 8 - - # Default working directory is /tmp, but its total size (1.2 GB) is not - # enough, so different working and cache directory are set. - CIRRUS_WORKING_DIR: /home/postgres/postgres - CCACHE_DIR: /home/postgres/cache - - PATH: /usr/sbin:$PATH - CORE_DUMP_DIR: /var/crash - - matrix: - - name: NetBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_NETBSD - only_if: $CI_NETBSD_ENABLED - env: - OS_NAME: netbsd - IMAGE_FAMILY: pg-ci-netbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig' - # initdb fails with: 'invalid locale settings' error on NetBSD. - # Force 'LANG' and 'LC_*' variables to be 'C'. - # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us - LANG: "C" - LC_ALL: "C" - # -Duuid is not set for the NetBSD, see the comment below, above - # configure_script, for more information. - MESON_FEATURES: >- - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Dpam=enabled - - setup_additional_packages_script: | - #pkgin -y install ... - <<: *netbsd_task_template - - - name: OpenBSD - Meson - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star - trigger_type: $CI_TRIGGER_TYPE_OPENBSD - only_if: $CI_OPENBSD_ENABLED - env: - OS_NAME: openbsd - IMAGE_FAMILY: pg-ci-openbsd-postgres - PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig' - CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin - - MESON_FEATURES: >- - -Dbsd_auth=enabled - -Dlibcurl=enabled - -Dtcl_version=tcl86 - -Duuid=e2fs - - setup_additional_packages_script: | - #pkg_add -I ... - # Always core dump to ${CORE_DUMP_DIR} - set_core_dump_script: sysctl -w kern.nosuidcoredump=2 - <<: *openbsd_task_template - - sysinfo_script: | - locale - id - uname -a - ulimit -a -H && ulimit -a -S - env - - ccache_cache: - folder: $CCACHE_DIR - setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh - create_user_script: | - useradd postgres - chown -R postgres:users /home/postgres - mkdir -p ${CCACHE_DIR} - chown -R postgres:users ${CCACHE_DIR} - setup_core_files_script: | - mkdir -p ${CORE_DUMP_DIR} - chmod -R 770 ${CORE_DUMP_DIR} - chown -R postgres:users ${CORE_DUMP_DIR} - - # -Duuid=bsd is not set since 'bsd' uuid option - # is not working on NetBSD & OpenBSD. See - # https://www.postgresql.org/message-id/[email protected] - # And other uuid options are not available on NetBSD. - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debugoptimized \ - --pkg-config-path ${PKGCONFIG_PATH} \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - EOF - - build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}' - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - cores_script: | - # Although we try to configure the OS to core dump inside - # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the - # ${CORE_DUMP_DIR} directory. - find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \; - src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR} - - -# configure feature flags, shared between the task running the linux tests and -# the CompilerWarnings task -LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >- - --with-gssapi - --with-icu - --with-ldap - --with-libcurl - --with-libxml - --with-libxslt - --with-llvm - --with-lz4 - --with-pam - --with-perl - --with-python - --with-selinux - --with-ssl=openssl - --with-systemd - --with-tcl --with-tclconfig=/usr/lib/tcl8.6/ - --with-uuid=ossp - --with-zstd - - -# Check SPECIAL in the matrix: below -task: - env: - CPUS: 4 - BUILD_JOBS: 4 - TEST_JOBS: 8 # experimentally derived to be a decent choice - IMAGE_FAMILY: pg-ci-trixie - - CCACHE_DIR: /tmp/ccache_dir - DEBUGINFOD_URLS: "https://debuginfod.debian.net"; - - # Enable a reasonable set of sanitizers. Use the linux task for that, as - # it's one of the fastest tasks (without sanitizers). Also several of the - # sanitizers work best on linux. - # - # The overhead of alignment sanitizer is low, undefined behaviour has - # moderate overhead. Test alignment sanitizer in the meson task, as it - # does both 32 and 64 bit builds and is thus more likely to expose - # alignment bugs. - # - # Address sanitizer in contrast is somewhat expensive. Enable it in the - # autoconf task, as the meson task tests both 32 and 64bit. - # - # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes - # print_stacktraces=1,verbosity=2, duh - # detect_leaks=0: too many uninteresting leak errors in short-lived binaries - UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2 - ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0 - - # SANITIZER_FLAGS is set in the tasks below - CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS - CXXFLAGS: $CFLAGS - LDFLAGS: $SANITIZER_FLAGS - CC: ccache gcc - CXX: ccache g++ - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - LINUX_MESON_FEATURES: >- - -Duuid=e2fs - - <<: *linux_task_template - - depends_on: SanityCheck - only_if: $CI_LINUX_ENABLED - - ccache_cache: - folder: ${CCACHE_DIR} - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - export - create_user_script: | - useradd -m postgres - chown -R postgres:postgres . - mkdir -p ${CCACHE_DIR} - chown -R postgres:postgres ${CCACHE_DIR} - echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf - su postgres -c "ulimit -l -H && ulimit -l -S" - setup_core_files_script: | - mkdir -m 770 /tmp/cores - chown root:postgres /tmp/cores - sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core' - - setup_hosts_file_script: | - cat >> /etc/hosts <<-EOF - 127.0.0.1 pg-loadbalancetest - 127.0.0.2 pg-loadbalancetest - 127.0.0.3 pg-loadbalancetest - EOF - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - matrix: - # SPECIAL: - # - Uses address sanitizer, sanitizer failures are typically printed in - # the server log - # - Configures postgres with a small segment size - - name: Linux - Debian Trixie - Autoconf - - env: - SANITIZER_FLAGS: -fsanitize=address - PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range - - # Normally, the "relation segment" code basically has no coverage in our - # tests, because we (quite reasonably) don't generate tables large - # enough in tests. We've had plenty bugs that we didn't notice due the - # code not being exercised much. Thus specify a very small segment size - # here. Use a non-power-of-two segment size, given we currently allow - # that. - configure_script: | - su postgres <<-EOF - set -e - ./configure \ - --enable-cassert --enable-injection-points --enable-debug \ - --enable-tap-tests --enable-nls \ - --with-segsize-blocks=6 \ - --with-libnuma \ - --with-liburing \ - \ - ${LINUX_CONFIGURE_FEATURES} \ - \ - CLANG="ccache clang" - EOF - build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin" - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited # default is 0 - make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_ac - - # SPECIAL: - # - Uses undefined behaviour and alignment sanitizers, sanitizer failures - # are typically printed in the server log - # - Test both 64bit and 32 bit builds - # - uses io_method=io_uring - # - Uses meson feature autodetection - - name: Linux - Debian Trixie - Meson - - env: - CCACHE_MAXSIZE: "400M" # tests two different builds - SANITIZER_FLAGS: -fsanitize=alignment,undefined - PG_TEST_INITDB_EXTRA_OPTS: >- - -c io_method=io_uring - - configure_script: | - su postgres <<-EOF - set -e - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - ${LINUX_MESON_FEATURES} -Dllvm=enabled \ - build - EOF - - # Also build & test in a 32bit build - it's gotten rare to test that - # locally. - configure_32_script: | - su postgres <<-EOF - set -e - export CC='ccache gcc -m32' - export CXX='ccache g++ -m32' - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \ - -DPERL=perl5.40-i386-linux-gnu \ - ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \ - build-32 - EOF - - build_script: | - su postgres <<-EOF - set -e - ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - build_32_script: | - su postgres <<-EOF - set -e - ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET} - ninja -C build -t missingdeps - EOF - - upload_caches: ccache - - test_world_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - EOF - # so that we don't upload 64bit logs if 32bit fails - rm -rf build/ - - # There's currently no coverage of icu with LANG=C in the buildfarm. We - # can easily provide some here by running one of the sets of tests that - # way. Newer versions of python insist on changing the LC_CTYPE away - # from C, prevent that with PYTHONCOERCECLOCALE. - test_world_32_script: | - su postgres <<-EOF - set -e - ulimit -c unlimited - PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS} - EOF - - on_failure: - <<: *on_failure_meson - - on_failure: - cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores - - -# NB: macOS is by far the most expensive OS to run CI for, therefore no -# expensive additional checks should be added. -# -# SPECIAL: -# - Enables --clone for pg_upgrade and pg_combinebackup -task: - name: macOS - Sequoia - Meson - - env: - CPUS: 4 # always get that much for cirrusci macOS instances - BUILD_JOBS: $CPUS - # Test performance regresses noticeably when using all cores. 8 seems to - # work OK. See - # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de - TEST_JOBS: 8 - IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia - - CIRRUS_WORKING_DIR: ${HOME}/pgsql/ - CCACHE_DIR: ${HOME}/ccache - MACPORTS_CACHE: ${HOME}/macports-cache - - MESON_FEATURES: >- - -Dbonjour=enabled - -Ddtrace=enabled - -Dgssapi=enabled - -Dlibcurl=enabled - -Dnls=enabled - -Duuid=e2fs - - MACOS_PACKAGE_LIST: >- - ccache - icu - kerberos5 - lz4 - meson - openldap - openssl - p5.34-io-tty - p5.34-ipc-run - python312 - tcl - zstd - - CC: ccache cc - CXX: ccache c++ - CFLAGS: -Og -ggdb - CXXFLAGS: -Og -ggdb - - PG_TEST_PG_UPGRADE_MODE: --clone - PG_TEST_PG_COMBINEBACKUP_MODE: --clone - - <<: *macos_task_template - - depends_on: SanityCheck - only_if: $CI_MACOS_ENABLED - - sysinfo_script: | - id - uname -a - ulimit -a -H && ulimit -a -S - export - - setup_core_files_script: - - mkdir ${HOME}/cores - - sudo sysctl kern.corefile="${HOME}/cores/core.%P" - - # Use macports, even though homebrew is installed. The installation - # of the additional packages we need would take quite a while with - # homebrew, even if we cache the downloads. We can't cache all of - # homebrew, because it's already large. So we use macports. To cache - # the installation we create a .dmg file that we mount if it already - # exists. - # XXX: The reason for the direct p5.34* references is that we'd need - # the large macport tree around to figure out that p5-io-tty is - # actually p5.34-io-tty. Using the unversioned name works, but - # updates macports every time. - macports_cache: - folder: ${MACPORTS_CACHE} - fingerprint_script: | - # Reinstall packages if the OS major version, the list of the packages - # to install or the MacPorts install script changes. - sw_vers -productVersion | sed 's/\..*//' - echo $MACOS_PACKAGE_LIST - md5 src/tools/ci/ci_macports_packages.sh - reupload_on_changes: true - setup_additional_packages_script: | - sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST - # system python doesn't provide headers - sudo /opt/local/bin/port select python3 python312 - # Make macports install visible for subsequent steps - echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV - upload_caches: macports - - ccache_cache: - folder: $CCACHE_DIR - configure_script: | - export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/" - meson setup \ - ${MESON_COMMON_PG_CONFIG_ARGS} \ - --buildtype=debug \ - -Dextra_include_dirs=/opt/local/include \ - -Dextra_lib_dirs=/opt/local/lib \ - ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \ - build - - build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET} - upload_caches: ccache - - test_world_script: | - ulimit -c unlimited # default is 0 - ulimit -n 1024 # default is 256, pretty low - meson test $MTEST_ARGS --num-processes ${TEST_JOBS} - - on_failure: - <<: *on_failure_meson - cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores" - - -WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE - env: - # Half the allowed per-user CPU cores - CPUS: 4 - - # The default cirrus working dir is in a directory msbuild complains about - CIRRUS_WORKING_DIR: "c:/cirrus" - # git's tar doesn't deal with drive letters, see - # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net - TAR: "c:/windows/system32/tar.exe" - # Avoids port conflicts between concurrent tap test runs - PG_TEST_USE_UNIX_SOCKETS: 1 - PG_REGRESS_SOCK_DIR: "c:/cirrus/" - DISK_SIZE: 50 - IMAGE_FAMILY: pg-ci-windows-ci - - sysinfo_script: | - chcp - systeminfo - powershell -Command get-psdrive -psprovider filesystem - set - - -task: - name: Windows - Server 2022, VS 2019 - Meson & ninja - << : *WINDOWS_ENVIRONMENT_BASE - - env: - TEST_JOBS: 8 # wild guess, data based value welcome - - # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That - # prevents crash reporting from working unless binaries do SetErrorMode() - # themselves. Furthermore, it appears that either python or, more likely, - # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very - # occasionally *trigger* a crash on process exit - which is hard to debug, - # given that it explicitly prevents crash dumps from working... - # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX - CIRRUS_WINDOWS_ERROR_MODE: 0x8001 - - MESON_FEATURES: - -Dcpp_args=/std:c++20 - -Dauto_features=disabled - -Dldap=enabled - -Dssl=openssl - -Dtap_tests=enabled - -Dplperl=enabled - -Dplpython=enabled - - <<: *windows_task_template - - depends_on: SanityCheck - only_if: $CI_WINDOWS_ENABLED - - setup_additional_packages_script: | - REM choco install -y --no-progress ... - - setup_hosts_file_script: | - echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts - type c:\Windows\System32\Drivers\etc\hosts - - configure_script: | - vcvarsall x64 - meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build - - build_script: | - vcvarsall x64 - ninja -C build %MBUILD_TARGET% - ninja -C build -t missingdeps - - check_world_script: | - vcvarsall x64 - meson test %MTEST_ARGS% --num-processes %TEST_JOBS% - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - << : *WINDOWS_ENVIRONMENT_BASE - name: Windows - Server 2022, MinGW64 - Meson - - # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star. - trigger_type: $CI_TRIGGER_TYPE_MINGW - - depends_on: SanityCheck - only_if: $CI_MINGW_ENABLED - - env: - TEST_JOBS: 4 # higher concurrency causes occasional failures - CCACHE_DIR: C:/msys64/ccache - CCACHE_MAXSIZE: "500M" - CCACHE_SLOPPINESS: pch_defines,time_macros - CCACHE_DEPEND: 1 - # for some reason mingw plpython cannot find its installation without this - PYTHONHOME: C:/msys64/ucrt64 - # prevents MSYS bash from resetting error mode - MSYS: winjitdebug - # Start bash in current working directory - CHERE_INVOKING: 1 - BASH: C:\msys64\usr\bin\bash.exe -l - - # Keep -Dnls explicitly disabled, as the number of files it creates causes a - # noticeable slowdown. - MESON_FEATURES: >- - -Dnls=disabled - - <<: *windows_task_template - - ccache_cache: - folder: ${CCACHE_DIR} - - setup_additional_packages_script: | - REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ... - - mingw_info_script: | - %BASH% -c "where gcc" - %BASH% -c "gcc --version" - %BASH% -c "where perl" - %BASH% -c "perl --version" - - configure_script: | - %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build" - - build_script: | - %BASH% -c "ninja -C build ${MBUILD_TARGET}" - - upload_caches: ccache - - test_world_script: | - %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%" - - on_failure: - <<: *on_failure_meson - crashlog_artifacts: - path: "crashlog-*.txt" - type: text/plain - - -task: - name: CompilerWarnings - - # To limit unnecessary work only run this once the SanityCheck - # succeeds. This is particularly important for this task as we intentionally - # use always: to continue after failures. - depends_on: SanityCheck - only_if: $CI_COMPILERWARNINGS_ENABLED - - env: - CPUS: 4 - BUILD_JOBS: 4 - IMAGE_FAMILY: pg-ci-trixie - - # Use larger ccache cache, as this task compiles with multiple compilers / - # flag combinations - CCACHE_MAXSIZE: "1G" - CCACHE_DIR: "/tmp/ccache_dir" - - LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES - - <<: *linux_task_template - - sysinfo_script: | - id - uname -a - cat /proc/cmdline - ulimit -a -H && ulimit -a -S - gcc -v - clang -v - export - - ccache_cache: - folder: $CCACHE_DIR - - setup_additional_packages_script: | - #apt-get update - #DEBIAN_FRONTEND=noninteractive apt-get -y install ... - - ### - # Test that code can be built with gcc/clang without warnings - ### - - setup_script: echo "COPT=-Werror" > src/Makefile.custom - - # Trace probes have a history of getting accidentally broken. Use the - # different compilers to build with different combinations of dtrace on/off - # and cassert on/off. - - # gcc, cassert off, dtrace on - always: - gcc_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # gcc, cassert on, dtrace off - always: - gcc_a_warning_script: | - time ./configure \ - --cache gcc.cache \ - --enable-cassert \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert off, dtrace off - always: - clang_warning_script: | - time ./configure \ - --cache clang.cache \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # clang, cassert on, dtrace on - always: - clang_a_warning_script: | - time ./configure \ - --cache clang.cache \ - --enable-cassert \ - --enable-dtrace \ - ${LINUX_CONFIGURE_FEATURES} \ - CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - # cross-compile to windows - always: - mingw_cross_warning_script: | - time ./configure \ - --host=x86_64-w64-mingw32ucrt \ - --enable-cassert \ - --without-icu \ - CC="ccache x86_64-w64-mingw32ucrt-gcc" \ - CXX="ccache x86_64-w64-mingw32ucrt-g++" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} world-bin - - ### - # Verify docs can be built - ### - # XXX: Only do this if there have been changes in doc/ since last build - always: - docs_build_script: | - time ./configure \ - --cache gcc.cache \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -C doc - - ### - # Verify headerscheck / cpluspluscheck succeed - # - # - Run both in same script to increase parallelism, use -k to get result of both - # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose - ### - always: - headers_headerscheck_script: | - time ./configure \ - ${LINUX_CONFIGURE_FEATURES} \ - --cache gcc.cache \ - --quiet \ - CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang" - make -s -j${BUILD_JOBS} clean - time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10' - - always: - upload_caches: ccache -- 2.54.0.380.gc69baaf57b --rv3g7aw7ud36z5b5 Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v6a-0004-smaller-segsize-for-tests.patch" ^ permalink raw reply [nested|flat] 135+ messages in thread
end of thread, other threads:[~2026-05-28 17:31 UTC | newest] Thread overview: 135+ messages (download: mbox mbox.gz follow: Atom feed) -- links below jump to the message on this page -- 2026-04-27 14:19 [PATCH v20 2/3] Lock referenced objects before permission checks in DDL commands Bertrand Drouvot <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]> 2026-05-28 17:31 [PATCH v6a 3/5] disable cirrus Andres Freund <[email protected]>
This inbox is served by agora; see mirroring instructions for how to clone and mirror all data and code used for this inbox