agora inbox for [email protected]help / color / mirror / Atom feed
[PATCH v52 07/10] Check for transaction block early in ExecRepack 157+ messages / 2 participants [nested] [flat]
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
* [PATCH v12a 3/3] ci: macports improvements @ 2026-06-04 14:17 Andres Freund <[email protected]> 0 siblings, 0 replies; 157+ messages in thread From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw) I realized two things: 1) We should save the macports cache before building & running tests, we don't want to again start from scratch if the task failed or was cancelled 2) We should use a partial cache match, as it's much faster to start from that, than from scratch. This requires some additional complexity, we now need an explicit restore step and need to check if the install step succeeded. But it's a very substantial improvement in runtime, so it's worthwhile. --- .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index dea8d95d729..dd4ff4c91d3 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -690,18 +690,23 @@ jobs: sudo sysctl kern.corefile="$HOME/cores/core.%P" - name: "Macports: Compute cache key" - id: mpkey + id: mp-key run: | macos_major=$(sw_vers -productVersion | sed 's/\..*//') pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q) script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh) echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT" + # It's faster to start with a partial cache for the same macos + # version than from scratch + echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT" - name: "MacPorts: Restore cache" - uses: actions/cache@v5 + id: mp-restore + uses: actions/cache/restore@v5 with: path: ${{ env.MACPORTS_CACHE }} - key: ${{ steps.mpkey.outputs.key }} + key: ${{ steps.mp-key.outputs.key }} + restore-keys: ${{ steps.mp-key.outputs.restore-key }} # Use MacPorts, even though Homebrew is installed. The installation # of the additional packages we need would take quite a while with @@ -714,6 +719,7 @@ jobs: # actually p5.34-io-tty. Using the unversioned name works, but # updates MacPorts every time. - name: "MacPorts: Install dependencies" + id: mp-install env: # Pass token so the script's GitHub API call to list MacPorts # releases isn't subject to the 60/h/IP unauthenticated rate @@ -727,6 +733,18 @@ jobs: echo /opt/local/sbin >> "$GITHUB_PATH" echo /opt/local/bin >> "$GITHUB_PATH" + # Save macports before running build / tests, creating macports can be + # quite slow, so we don't want to start from scratch in the next run. + - name: "MacPorts: Save cache" + uses: actions/cache/save@v5 + # Don't save cache if we had an exact match + if: | + steps.mp-install.conclusion == 'success' && + steps.mp-restore.outputs.cache-hit != 'true' + with: + path: ${{ env.MACPORTS_CACHE }} + key: ${{ steps.mp-key.outputs.key }} + - name: Configure env: PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/ -- 2.54.0.380.gc69baaf57b --ijwec7zgt2lxep65-- ^ permalink raw reply [nested|flat] 157+ messages in thread
end of thread, other threads:[~2026-06-04 14:17 UTC | newest] Thread overview: 157+ messages (download: mbox mbox.gz follow: Atom feed) -- links below jump to the message on this page -- 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]> 2026-06-04 14:17 [PATCH v12a 3/3] ci: macports improvements Andres Freund <[email protected]>
This inbox is served by agora; see mirroring instructions for how to clone and mirror all data and code used for this inbox