agora inbox for [email protected]help / color / mirror / Atom feed
[PATCH v53 5/7] Check for transaction block early in ExecRepack 134+ messages / 2 participants [nested] [flat]
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
* [PATCH v13a 9/9] ci: Move to per-job naming for containers @ 2026-06-12 16:57 Andres Freund <[email protected]> 0 siblings, 0 replies; 134+ messages in thread From: Andres Freund @ 2026-06-12 16:57 UTC (permalink / raw) Previously we only had two types of containers, "ci" for everything but the CompilerWarnings job and ci_docs that had the tools necessary to build the docs as part of CompilerWarnings. But that was unnecessarily heavy for several of the jobs. As the pull time is a noticeable performance factor, that's not great. Instead use containers that are named by their job. Today some of those are the same, but after this change we can optimize the containers for their jobs without a problem. It probably would make sense to allow over-riding CONTAINER_REPO on a per-repo/org basis, but that seems better done as a separate change. Discussion: https://postgr.es/m/a2ejn7lfqolutzz7kozalbhy3bixdrujb4buc3pgbtlk4am2ba@wbv6v7riia33 --- .github/workflows/pg-ci.yml | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml index c737173abe0..4034f76e0a1 100644 --- a/.github/workflows/pg-ci.yml +++ b/.github/workflows/pg-ci.yml @@ -108,9 +108,12 @@ env: # Debian Trixie containers used by all Linux jobs. Built by # 'https://github.com/anarazel/pg-vm-images/';. + # + # The containers are named + # ghcr.io/anarazel/pg-vm-images/<branch>/linux_debian_ci/<debian version>/<ci-job>:latest CONTAINER_REPO: ghcr.io/anarazel/pg-vm-images/main - CONTAINER_LINUX_CI: linux_debian_trixie_ci:latest - CONTAINER_LINUX_CI_DOCS: linux_debian_trixie_ci_docs:latest + CONTAINER_LINUX_CI_NAME: linux_debian_ci/trixie + CONTAINER_TAG: latest # The full set of OS / job selectors recognized by the `ci-os-only:` # commit-message directive parsed in the `setup` job below. @@ -193,7 +196,7 @@ jobs: # # To allow over-riding what runners jobs use, we allow setting # repository / org level variables influencing that choice on a - # per-host-operating-system basis. + # per-host-operating-system basis. See also src/tools/ci/README # # This also makes it easier to change the version of linux / windows # used centrally. We don't just want to use ubuntu-latest, as it's not @@ -210,8 +213,8 @@ jobs: # Re-export workflow-level env vars that other jobs need to reference # from contexts (e.g. `jobs.<id>.container.image`) where the `env` # context is not available. - container_linux_ci: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI }} - container_linux_ci_docs: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_DOCS }} + container_linux_ci_base: ${{ env.CONTAINER_REPO }}/${{ env.CONTAINER_LINUX_CI_NAME }} + container_tag: ${{ env.CONTAINER_TAG }} # Can't use the output from above, so repeated verbatim here runs-on: ${{ case(vars.pg_ci_runs_on_setup != '', vars.pg_ci_runs_on_setup, 'ubuntu-slim') }} @@ -277,8 +280,8 @@ jobs: needs.setup.outputs.sanitycheck == 'true' runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 15 - container: &linux_ci_container - image: ${{ needs.setup.outputs.container_linux_ci }} + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/sanity-check:${{ needs.setup.outputs.container_tag }} # Options passed to all linux containers. Not all of the jobs need # all of them, but it's easier to just define them centrally. @@ -464,7 +467,9 @@ jobs: needs.setup.outputs.linux == 'true' && needs.sanity-check.result != 'failure' runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-autoconf:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: &linux_env @@ -558,7 +563,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-32:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -650,7 +657,9 @@ jobs: needs: [setup, sanity-check] if: *linux_job_if runs-on: ${{ needs.setup.outputs.runs_on_linux }} - container: *linux_ci_container + container: + image: ${{ needs.setup.outputs.container_linux_ci_base }}/linux-meson-64:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options timeout-minutes: 60 env: *linux_env @@ -1194,7 +1203,8 @@ jobs: runs-on: ${{ needs.setup.outputs.runs_on_linux }} timeout-minutes: 60 container: - image: ${{ needs.setup.outputs.container_linux_ci_docs }} + image: ${{ needs.setup.outputs.container_linux_ci_base }}/compiler-warnings:${{ needs.setup.outputs.container_tag }} + options: *linux_container_options env: # Use larger ccache cache as this job compiles with multiple # compilers / flag combinations. -- 2.54.0.450.g9ac3f193c0 --mr2uqtieh2e2xvha-- ^ permalink raw reply [nested|flat] 134+ messages in thread
end of thread, other threads:[~2026-06-12 16:57 UTC | newest] Thread overview: 134+ messages (download: mbox mbox.gz follow: Atom feed) -- links below jump to the message on this page -- 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]> 2026-06-12 16:57 [PATCH v13a 9/9] ci: Move to per-job naming for containers Andres Freund <[email protected]>
This inbox is served by agora; see mirroring instructions for how to clone and mirror all data and code used for this inbox